MacBook Pro User’s Guide Includes setup, expansion, and troubleshooting information for your MacBook Pro computer
K Apple Computer, Inc. ©2006 Apple Computer, Inc. All rights reserved. Under the copyright laws, this manual may not be copied, in whole or in part, without the written consent of Apple. Every effort has been made to ensure that the information in this manual is accurate. Apple is not responsible for printing or clerical errors. Apple 1 Infinite Loop Cupertino, CA 95014-2084 408-996-1010 www.apple.
Contents 7 8 16 18 20 22 24 25 Chapter 1: Getting Started Setting Up Your MacBook Pro Basic Features of Your MacBook Pro Keyboard Features of Your MacBook Pro Additional Features of Your MacBook Pro Putting Your MacBook Pro to Sleep or Shutting It Down Calibrating Your Battery Getting More Information 27 28 30 31 33 34 35 39 42 Chapter 2: Getting to Know Your MacBook Pro Adjusting Your Display Using Your Power Adapter Using the Trackpad Using the Keyboard Using a Mouse Using the Apple Remote and Front R
4 45 46 47 47 48 Learning About Mac OS X Customizing Your Desktop and Setting Your Preferences Using Applications When an Application Does Not Respond Keeping Your Software Up to Date Connecting to a Printer 49 Playing a CD and Connecting Headphones 50 Connecting a Camera or Other FireWire or USB Device 50 Transferring Files to Another Computer 53 54 57 61 62 64 66 67 71 72 76 77 81 4 Chapter 3: Using Your MacBook Pro Using Universal Serial Bus Devices Connecting with FireWire Using ExpressCards How Ai
83 Chapter 4: Adding Memory to Your MacBook Pro 84 Installing Additional Memory 91 Making Sure Your MacBook Pro Recognizes the New Memory 93 Chapter 5: Troubleshooting 94 Problems That Prevent You From Using Your Computer 96 99 101 102 102 Other Problems Reinstalling the Software That Came With Your Computer Using Apple Hardware Test Installing Xcode Tools Locating Your Product Serial Number 103 Appendix A: Specifications 105 105 106 107 109 111 113 Appendix B: Safety, Use, and Care Information Understan
119 Entering Your Information 121 Troubleshooting Your Connection 125 Appendix D: Top Ten Questions 131 Communications Regulation Information 135 Index 6 Contents
1 Getting Started 1 Your MacBook Pro includes the following components: ® MENU Apple Remote Power adapter DVI to VGA adapter AC power cord Important: Read all the installation instructions and safety information (see “Safety, Use, and Care Information” on page 105) carefully before you plug your computer into a power outlet.
Setting Up Your MacBook Pro Your MacBook Pro is designed so that you can set it up quickly and start using it right away. The following pages take you through the setup process, including these tasks:  Plugging in the power adapter  Connecting the cables  Turning on your MacBook Pro  Configuring a user account and other settings using Setup Assistant Step 1: Plug In the Power Adapter If there is protective film around the power adapter, remove it before setting up your MacBook Pro.
Warning: Make sure the AC plug is fully inserted into the power adapter and the electrical prongs on your AC plug are in their completely extended position before you plug the adapter into the power outlet. AC plug Power adapter plug ¯ Power adapter port ® AC power cord To extend the reach of your power adapter, you can attach the AC power cord. First, pull up on the AC plug to remove it from the adapter, and then attach the included AC power cord to the adapter. Plug the other end into a power outlet.
Note: Using a dial-up connection requires the external Apple USB Modem, available for purchase from the online Apple Store at www.apple.com/store or from an Apple Authorized Reseller. Plug the Apple USB Modem into a USB port on the MacBook Pro, and then connect a phone cord (not included) from the modem into a phone wall jack.
2 Choose a network from the AirPort (Z) status menu. Step 3: Turn On Your MacBook Pro 1 To turn on the MacBook Pro, press the power (®) button briefly (up to 1 second). Do not continue to hold down or press the power button after the startup tone or you might cause the computer to shut down again. When you turn on the computer, you should see the sleep indicator light turn on (and stay on), and you should hear a tone.
Important: Use only one finger on the trackpad to move the pointer. The trackpad is designed to allow scrolling when you use two fingers and the scrolling feature is turned on by default. See “Using the Trackpad” on page 31 for more information. Â Use the trackpad button to select, click, or double-click items on the screen.
Problems Turning On the Computer? Nothing happens when you press the power (®) button. Â The battery might be drained. Make sure that you plugged the power adapter firmly into both the computer and a power source. The power adapter plug should light when you plug it into the computer. Â If the computer still doesn’t start up, see “Problems That Prevent You From Using Your Computer” on page 94. You see a picture of a disk or a folder with a blinking question mark.
To transfer information, make sure:  Your other Mac has built-in FireWire and supports FireWire Target Disk Mode  Your other Mac has Mac OS X v10.1 or later installed  You have a standard 6-pin to 6-pin FireWire cable Setup Assistant takes you through the process of transferring your information—just follow the onscreen instructions. Transferring information to your MacBook Pro does not affect the information on your other Mac.
If you don’t intend to keep or use your other Mac, it’s best to deauthorize it from playing music, videos, or audiobooks that you’ve purchased from the iTunes Music Store. Deauthorizing a computer prevents any songs, videos, or audiobooks you’ve purchased from being played by someone else and frees up another authorization for use (you can have only five authorized computers at a time for an iTunes account).
Basic Features of Your MacBook Pro iSight camera Camera indicator light Built-in stereo speakers Microphone Sleep indicator light ® Infrared (IR) receiver Display release button 16 Trackpad button Chapter 1 Getting Started Trackpad Slot-loading SuperDrive ® Power button
Built-in iSight camera and camera indicator light Videoconference with others using the included iChat AV application. The green camera indicator light illuminates when the video camera is capturing and displaying video. Built-in stereo speakers Listen to music, movies, games, and other multimedia files. Microphone (built in under the left speaker grille) Use for videoconferencing with iChat AV and to record sounds directly on your hard disk.
Keyboard Features of Your MacBook Pro ® Function key (fn) — Mute esc F1 Brightness controls 18 F2 F3 F4 - Volume controls Chapter 1 Getting Started F5 num lock C Media i Video Mode Num Lock key control Eject key Toggle key F6 F7 F8 F9 F10 ø Keyboard illumination controls F11 F12 Standard function keys
Function (Fn) key Press and hold to activate customized actions assigned to the function keys (F1 to F12). To learn how to customize function keys, choose Help > Mac Help and search for “function keys.” ¤ Brightness controls Increase or decrease the brightness of your MacBook Pro display. — Mute control Mute the volume of the sound coming from the built-in speakers and headphone port. - Volume controls Increase or decrease the volume of the sound coming from the speakers and headphone port.
Additional Features of Your MacBook Pro d USB 2.0 port ¯ Power adapter port f Headphone/optical digital audio out port , Audio line in/optical digital audio in port d USB 2.
¯ Power adapter port Plug in the included power adapter to recharge your MacBook Pro battery. d Two Hi-Speed USB 2.0 (Universal Serial Bus) ports Connect equipment to your MacBook Pro, such as iPods, printers, digital cameras, modems, and more. (Compatible with standard USB devices.) , Audio line in/optical digital audio in port Connect your MacBook Pro to a line-level microphone or digital audio equipment.
For more information about these features, see Chapter 3, “Using Your MacBook Pro,” on page 53. Putting Your MacBook Pro to Sleep or Shutting It Down When you finish working with your MacBook Pro, you can put it to sleep or shut it down. Putting Your MacBook Pro to Sleep If you will be away from your MacBook Pro for only a short time, put the computer to sleep. When the computer is in sleep, you can quickly wake it and bypass the startup process.
Warning: Wait a few seconds until the white sleep indicator light on the display latch starts pulsating (indicating that the computer is in sleep and the hard disk has stopped spinning) before you move your MacBook Pro. Moving your computer while the hard disk is spinning can damage the hard disk, causing loss of data or the inability to start up from the hard disk. To wake the computer: Â If the display is closed, simply open it to wake up your MacBook Pro.
Calibrating Your Battery To get the longest running time from your battery, calibrate it sometime during the first week you have your MacBook Pro and repeat these steps occasionally to keep your battery functioning at its fullest capacity. To calibrate your battery: 1 Plug in the power adapter and fully charge your MacBook Pro battery until the light on the power adapter plug changes to green and the Battery icon in the menu bar indicates that the battery is fully charged.
Getting More Information For more information about your MacBook Pro, check out these resources: Â Read Chapter 2, “Getting to Know Your MacBook Pro,” on page 27 for important basics. Â If you’re unfamiliar with Mac OS X, review the Welcome to Tiger booklet that came with your computer and open Mac Help to browse the information there. For more information, see “Getting Answers Using Mac Help” on page 42.
2 Getting to Know Your MacBook Pro 2 This chapter introduces important basics about your MacBook Pro. Whenever you stop using your MacBook Pro, wait a few moments to let the hard disk and any disc (such as a CD or DVD) in your optical drive stop spinning before you transport the computer. Avoid jostling or bumping your MacBook Pro while discs are spinning. Note: Your MacBook Pro uses Sudden Motion Sensor technology to help protect the hard disk if the computer is dropped or experiences extreme vibration.
For more safety instructions about handling and using your MacBook Pro in different locations, make sure to see Appendix B, “Safety, Use, and Care Information,” on page 105. The rest of this chapter includes sections about using components of your MacBook Pro, such as the display, power adapter, trackpad, keyboard, built-in iSight camera, and Apple Remote, and information about Mac OS X, Mac Help, applications, and connecting to peripheral hardware.
3 Deselect “Reduce the brightness of the built-in display when using this power source” if you don’t want your display to dim to save on battery consumption. When this feature is enabled, your display dims a small amount when you go from using the power adapter with your MacBook Pro to using battery power. When you plug in the power adapter again, your display returns to its previous level of brightness.
Using Your Power Adapter Plugging in the power adapter provides AC power to the MacBook Pro and recharges the computer’s battery. Important: For optimal performance, use only the power adapter that came with your computer, or purchase an additional 85W Apple Portable Power Adapter. When you first connect your power adapter to your computer, an indicator light on the power adapter plug turns on. If you don’t see a light, your plug is probably not seated correctly.
AC power cord AC plug For best results, always use the AC power cord and connect it to a grounded power outlet when one is available. Use only the AC power cord that came with your power adapter. Make sure to push the power plug snugly into the power adapter port on the computer to ensure it is engaged and power is flowing to the computer. If the cord is plugged in properly, you will see an indicator light on the end of the cord that plugs into your MacBook Pro.
You can also scroll vertically and horizontally in a window that has scroll bars by moving two fingers on the trackpad. This feature can be turned off or adjusted in the Keyboard & Mouse pane of System Preferences. Tips for Using the Trackpad For best results when using the trackpad, keep in mind these tips: Â Use only one finger, except when the scrolling feature is turned on and you want to scroll. Â Do not use a pen or any other object. Â Keep your finger and the trackpad dry.
Using the Keyboard Your MacBook Pro keyboard has a numeric keypad incorporated in the standard keyboard keys. Keys used for the numeric keypad have a smaller secondary label. Num Lock key ALS sensor ® Numeric keypad ALS sensor To use the numeric keypad, press the Num Lock key. The Num Lock key glows green, indicating that the keypad is active. When you finish using the keypad, press the Num Lock key again to turn it off.
You can also adjust the keyboard illumination using the F8, F9, and F10 keys. Important: Even when the keyboard illumination feature is on, the keyboard illuminates only in low-light situations. You can turn off the keyboard illumination feature in the Keyboard & Mouse pane of System Preferences or by pressing the F8 key. Note: Exposé is preset to use the F9 and F10 keys, the same keys that adjust your keyboard illumination.
Using the Apple Remote and Front Row Your Apple Remote works with the Front Row interface and the built-in infrared (IR) receiver, which is located next to the display release button on your MacBook Pro. Use the Apple Remote to open Front Row and work with iTunes, iPhoto, QuickTime, DVD Player, and more from across the room. Use your Apple Remote to: Â Open Front Row and navigate through the Music, Photos, Videos, and DVD menus.
 Hold down the Next/Fast-forward (‘) or Previous/Rewind (]) button to fast-forward or rewind within a song or movie.  Hold down the Play/Pause (’) button for 3 seconds to put your MacBook Pro to sleep.
When you successfully pair your Apple Remote with your MacBook Pro, you will see a chainlink symbol ( ) onscreen. To delete a pairing between the Apple Remote and your MacBook Pro: 1 Choose Apple () > System Preferences from the menu bar. 2 Click Security and then click Unpair. Replacing the Battery The Apple Remote includes a battery. When needed, replace the battery with a CR 2032 battery. Press this button with a small blunt object to partially eject the battery compartment.
4 Close the battery compartment. Turning Off IR Reception You can use Security preferences to turn IR reception on your MacBook Pro on or off. To turn off IR reception: Â Choose Apple () > System Preferences from the menu bar and click Security. Â Select the “Disable remote control infrared receiver” checkbox. Using the Keyboard to Control Front Row In addition to using the Apple Remote to control Front Row, you can also use your keyboard.
Using the Built-in iSight Camera With the built-in iSight camera, you can take pictures with Photo Booth or video chat with other iChat AV users. Camera indicator light iSight camera Taking Pictures with Photo Booth Use Photo Booth to take pictures and add fun visual effects such as sepia, black and white, glow, colored pencil, and more.
To use a picture as your buddy picture or account picture: 1 Open Photo Booth and take a picture. 2 Select the picture you’d like to use as your buddy picture or account picture. 3 Click the Buddy Picture or Account Picture icon to automatically update your picture. More information about Photo Booth is available by choosing Help > Mac Help from the menu bar, and then choosing Library > Photo Booth Help.
Videoconferencing with iChat AV When you open iChat AV, the green indicator light goes on. Click the video icon of a buddy to videoconference with another iChat AV user in real-time full-motion video. Your MacBook Pro also has a built-in microphone, so you have both voice and video support for iChat AV videoconferences. To use the built-in iSight to videoconference, you must have the following: Â A .Mac, America Online (AOL), or AOL Instant Messenger (AIM) account (required for iChat AV).
Videoconferencing with More Than One Buddy You can videoconference with up to three buddies at once. One buddy “hosts” the videoconference, and the others participate. To start a videoconference with more than one buddy: 1 Open iChat AV. 2 Hold down the Command key while you select the buddies you want to invite. 3 Click the Camera button at the bottom of your buddy list. Turning Off the iSight Camera To turn off your iSight camera, close the active iChat window.
To access Mac Help: 1 Click the Finder icon in the Dock (the bar of icons at the bottom of the screen). 2 Choose Help > Mac Help (click the Help menu in the menu bar and choose Mac Help). 3 Click in the search field, type a question, and press Return on your keyboard.
Learning About Mac OS X Your computer comes with Mac OS X v10.4 Tiger, which includes Spotlight, a search engine that automatically indexes all of your files; Dashboard, an interface for putting handy “widgets” or mini-applications at your fingertips; Exposé, which tiles and neatly displays all your open applications; and much more.
Customizing Your Desktop and Setting Your Preferences You can quickly make your desktop look the way you want using System Preferences. Choose Apple () > System Preferences from the menu bar. Feel free to make changes and experiment with the following: Â Appearance: Select this preferences pane to change the colors of buttons, menus, windows, and highlight colors, among other options.
 Desktop & Screen Saver: Select this preferences pane to change the background color or pattern of your desktop, or change it to a photo or image you like. You can also choose an eye-catching screen effect that will appear on your screen when the computer is left idle.  Dock: Select this preferences pane to change the look, location, and behavior of your Dock (the bar of icons along the edge of the screen). As you get to know your computer, explore the other system preferences.
When an Application Does Not Respond On rare occasions, an application may “freeze” on the screen. Mac OS X provides a way to quit a frozen application without restarting your computer. Quitting a frozen application might allow you to save your work in other open applications. To force an application to quit: 1 Press Command (x)-Option-Esc or choose Apple () > Force Quit from the menu bar. The Force Quit Applications dialog appears with the application selected. 2 Click Force Quit.
To check for updated software: 1 Open System Preferences. 2 Click the Software Update icon and follow the directions on the screen. Â For more information, search for “Software Update” in Mac Help. Â For the latest information about Mac OS X, go to the Mac OS X website at www.apple.com/macosx. Connecting to a Printer Follow the instructions that came with your printer to install the required software and connect the printer. The drivers for most printers are built into Mac OS X.
To set up a printer: 1 Open System Preferences and click the Print & Fax icon. 2 Click Printing and then click the Add (+) button to add a printer. 3 Select the printer you want to use, and then click Add. 4 Use the Add (+) and Remove (–) buttons to choose the printers that appear in the printer list. Monitoring Printing After you send a document to a printer, you can monitor printing, including deleting your print job or putting it temporarily on hold.
Connecting a Camera or Other FireWire or USB Device If you have an iPod, digital camera, video camera, scanner, or other device that has a USB or FireWire connector, you can connect it to your MacBook Pro. Follow the installation instructions that came with your device. For more information about FireWire, see “Connecting with FireWire” on page 57. For more information about USB, see “Using Universal Serial Bus Devices” on page 54.
 If you connect your computer to a network using Ethernet, you can transfer files to another computer on a network. You can access a server or another computer by clicking Network in the Finder sidebar, or by choosing Go > Connect to Server from the menu bar.  You can create a small Ethernet network by connecting an Ethernet cable from your MacBook Pro to another computer’s Ethernet port. After you’re connected, you can transfer files directly from one computer to the other.
3 Using Your MacBook Pro 3 Your MacBook Pro has many built-in features and connection capabilities. These include the following: Â Universal Serial Bus (USB) 2.0 ports for connecting additional equipment such as iPods, printers, scanners, and other devices. See “Using Universal Serial Bus Devices” on page 54. Â A FireWire 400 port for connecting high-speed equipment such as digital video cameras and external hard drives. See “Connecting with FireWire” on page 57. Â An ExpressCard/34 slot.
 DVI video output with included DVI to VGA adapter for using your MacBook Pro with an external monitor or digital flat-panel display, including support for closed-lid operation, video mirroring, and extended desktop (dual-display) modes. Use the Apple DVI to Video Adapter, available separately, to display content on your TV. See “Using External Video Support” on page 67.  A SuperDrive for playing and burning CDs and DVDs. See “Using Your SuperDrive” on page 72.
® To use a USB device with your computer, connect the device to the computer. Your computer automatically detects newly connected devices and loads the correct software to work with the device. Note: If your MacBook Pro cannot find the correct software when you connect a USB device, you can either install the software that came with the device or go to the website of the device manufacturer to locate and install the correct software.
Using Multiple USB Devices at the Same Time You can purchase a USB hub to connect multiple USB devices to your computer. The USB hub connects to an open USB port on your computer and provides additional USB ports (usually four or seven). Hi-Speed hubs can support USB 2.0 Hi-Speed devices as well as USB 1.1–compatible devices. USB 1.1 hubs don’t allow Hi-Speed USB devices to operate at their maximum data speed. Some USB hubs have a power adapter and should be plugged into a power outlet.
® USB hub Getting More Information About USB Additional information about USB is available in Mac Help. Choose Help > Mac Help in the menu bar and search for “USB.” You can also find information on the Apple USB website at www.apple.com/usb. For information about USB devices available for your computer, check the Macintosh Products Guide at www.apple.com/guide. Connecting with FireWire Your computer has one FireWire 400 (H) port.
® These are some of the things you can do with FireWire: Â Connect a HDV or DV camera and capture, transfer, and edit high-quality video directly on your computer using video editing software such as iMovie HD or Final Cut Express. Â Connect an external FireWire hard disk drive and use it to back up data or transfer files. Â Start up from an external FireWire hard disk. Connect an external FireWire hard disk (with Mac OS X v10.4.
Using FireWire Devices To use a FireWire device with your computer, connect the device to the computer and install any software that came with the device. Your computer automatically detects newly connected devices. Note: If your MacBook Pro cannot find the correct software when you connect a FireWire device, you can either install the software that came with the device or go to the website of the device manufacturer to locate and install the correct software.
Connecting Your MacBook Pro to Another Computer Using FireWire If you want to transfer files between your MacBook Pro and another FireWire-equipped Macintosh computer, or if you have a problem that prevents your computer from starting up, you can use FireWire Target Disk Mode to connect to another computer. When you start up your computer in FireWire Target Disk Mode, the other computer can access your MacBook Pro as if it were an external hard disk.
Getting More Information About FireWire More information about FireWire is available in Mac Help. Choose Help > Mac Help in the Finder menu bar and search for “FireWire.” You can also find information on the Apple FireWire website at www.apple.com/firewire. Using ExpressCards You can expand your computer’s capabilities using the ExpressCard/34 slot. You can connect a TV tuner, flash memory cards, and more. Your MacBook Pro has one ExpressCard/34 slot that accepts 34mm ExpressCards.
Inserting and Ejecting an ExpressCard When inserting an ExpressCard, make sure the label is facing up and the card is level. You’ll feel some resistance as you slide in the card. When the card is firmly seated in the slot, it clicks into place and an icon appears on the desktop. You can eject an ExpressCard when your computer is on or off, but not when it is in sleep. To eject an ExpressCard: 1 If the computer is turned on, drag the card’s icon to the Trash (Eject icon).
AirPort Express AC outlet ® DSL or cable modem Connection to the Internet Getting More Information About AirPort Extreme To purchase an AirPort Extreme Base Station or AirPort Express, go to the online Apple Store at www.apple.com/store or contact an Apple Authorized Reseller. More information about AirPort Extreme and AirPort Express is available in AirPort Help. Choose Help > Mac Help, and then choose Library > AirPort Help. You can also find information on the Apple AirPort website at www.apple.
Using Bluetooth Wireless Technology Your MacBook Pro comes with Bluetooth wireless technology. With Bluetooth, you can make short-range wireless connections between desktop and portable computers, personal digital assistants (PDAs), mobile phones, camera phones, printers, digital cameras, and wireless input devices such as the Apple Wireless Keyboard and Apple Wireless Mouse (available for purchase from the online Apple Store at www.apple.com/store).
Setting Up a Bluetooth Device Before you can use a Bluetooth device with your MacBook Pro, you need to set up the device to work with your computer. After you set up the device, it is “paired” with your computer, and you can see it in the Devices pane of Bluetooth preferences. You pair your computer with the device only once, and they remain paired until you delete the pairing. To set up a Bluetooth device: 1 Choose Bluetooth (◊) status menu > Set up Bluetooth Device.
Connecting with Ethernet Your computer comes with built-in Ethernet (G) networking capability, which you can use to connect to a network or to a cable or DSL modem. ® Connecting to a network gives you access to other computers and potentially to network printers, modems, email, and the Internet. You can use Ethernet to share files between two computers or set up a small network. The Ethernet port on your MacBook Pro automatically detects other Ethernet devices.
Getting More Information About Using Ethernet More information, including setting up an Ethernet network and transferring files using Ethernet, is available in Mac Help. Choose Help > Mac Help and search for “Ethernet” or “network.” For information about networking products you can use with your MacBook Pro, check the Macintosh Products Guide at www.apple.com/guide.
® When an external monitor or TV is connected, you can either have the same image appear on both the built-in display and the external monitor (known as video mirroring) or use the external monitor to extend the size of the Mac OS desktop (known as dual-display or extended desktop mode). By default, your MacBook Pro starts up in dual-display mode. Press the F7 (i) key to switch between dual-display and videomirroring modes.
Connecting an External Display or Projector To connect an external display or projector with a DVI connection to your computer: 1 Turn on the external display or projector. 2 Make sure the display cable is connected to the external projector or display. 3 Connect the display cable to your MacBook Pro. Your MacBook Pro automatically detects the external display. 4 Adjust the resolution on the external display by using the Displays pane of System Preferences or the Displays status menu in the menu bar.
To operate your computer with an external monitor attached and the display closed: 1 Connect a USB keyboard and mouse to your MacBook Pro. 2 Connect the power adapter to the MacBook Pro and a power outlet. Check that the power adapter light is on. 3 Close the MacBook Pro display to put the computer to sleep. 4 Follow the steps in the previous section to connect your MacBook Pro to an external display. 5 Wait a few seconds and then press any key on the external keyboard to wake the MacBook Pro.
Connecting an Apple Flat-Panel Display You can connect your MacBook Pro to an Apple flat-panel display. Depending on the display used, the connection might require a DVI to ADC adapter, available from an Apple Store retail location, the online Apple Store at www.apple.com/store, or an Apple Authorized Reseller. Getting More Information About Using an External Monitor or TV Additional information about using and configuring an external monitor is available in Mac Help.
For applications that can record sound, such as iMovie, use the Sound pane of System Preferences to select the audio input device you want to use, including microphones connected through USB. The volume controls on your keyboard allow you to easily change volume. You can also access these controls from the Sound pane of System Preferences. For more information about using or troubleshooting sound on your computer, choose Help > Mac Help and search for “sound.
Inserting a CD or DVD Disc To install or use software from a CD or DVD disc: 1 With the computer turned on, insert the disc (with the label facing up) into the drive slot until you feel the drive catch the disc and pull it in. You might need to push the disc nearly all the way in before the drive takes it the rest of the way. This is normal. ® 2 When the disc icon appears on the desktop, the disc is ready to use.
Allow the disc to fully eject before removing or reinserting it. If you can’t eject the disc, quit any applications that might be using the disc and try again. If that doesn’t work, restart the computer while holding down the trackpad button. Playing DVDs To play a DVD-Video disc on your MacBook Pro, insert the DVD. DVD Player opens automatically. You’ll find DVD Player provides easy-to-use controls for starting, stopping, and viewing DVDs.
To record data on CD-R, CD-RW, DVD-R, DVD-RW, DVD+R, or DVD+RW discs: 1 Insert a blank recordable CD or DVD disc into the drive. 2 In the dialog that appears, enter a name for the disc and select the format you want to use. 3 Double-click the disc icon that appears on your desktop, and then drag files and folders to it. 4 Click the Burn Disc icon beside the disc name in the Finder sidebar. You can also record music on CD or DVD discs right from your iTunes library.
4 Click the Burn button again. For more information, open iDVD and choose Help > iDVD Help. Important: If your battery runs down when you are burning a DVD, the burn can fail and the DVD disc will not be able to be used again. To prevent this, always use your power adapter when burning a DVD. Getting More Information For more information about DVD Player and iTunes, see these resources: Â For instructions about using DVD Player, open DVD Player and choose Help > DVD Player Help from the menu bar.
Using Your Battery When the external power adapter is not connected, your computer draws power from its battery. The length of time that you can run your MacBook Pro varies, depending on the applications you use and the external devices connected to your MacBook Pro. Turning off features such as AirPort Extreme or Bluetooth wireless technology can help conserve battery charge. For more information about using your battery, see “Understanding Battery Conservation Tips” on page 79.
Battery Battery LEDs If the battery icon in the Finder menu bar is set to show the percentage of charge, you might sometimes notice that the battery does not attain a full 100 percent charge when the power adapter is attached. This is normal behavior; battery life is maximized if charging is not continuously cycled on and off when the battery’s charge capacity is between 95 and 100 percent. When the battery level eventually drops below 95 percent, it will charge all the way to 100 percent.
Charging a Battery When the power adapter that came with your computer is connected, the battery recharges whether the computer is off, on, or in sleep. However, the battery recharges more quickly if the computer is off or in sleep. When the MacBook Pro is on, you can monitor the battery charge level using the Battery status menu in the menu bar.
 Turn off AirPort or Bluetooth when they are not in use. (Use the AirPort and Bluetooth status menus in the menu bar. If these icons don’t appear in the menu bar, you can turn them on in the Network and Bluetooth panes of System Preferences.)  Quit open applications that you are not using.  Remove CD and DVD discs when they are not in use.  Reduce screen brightness using the brightness controls on the MacBook Pro keyboard.  Set the hard disk to spin down after a short time.
Securing Your MacBook Pro You can purchase a security cable lock to protect your MacBook Pro. With a lock, you can secure your computer to a desk or table. ® Security slot Sample locking device with security cable Getting More Information About Security Options Additional information about the software security features of your MacBook Pro, including multiple user passwords and file encryption, is available in Mac Help. Choose Help > Mac Help and search for “security” or “multiple users.
4 Adding Memory to Your MacBook Pro 4 This chapter provides information and instructions for installing additional memory and for removing and replacing the battery in your MacBook Pro. Warning: Apple recommends that you have an Apple-certified technician install memory. Consult the service and support information that came with your computer for instructions on how to contact Apple for service.
 PC2-5300 DDR2 667 MHz Type RAM Depending on the configuration of the MacBook Pro you purchased, both memory slots might already be full. The maximum amount of memory you can install in your MacBook Pro is 2 GB, using 1 GB DIMMs in both memory slots. Installing Additional Memory Installing memory involves removing and replacing your battery. The following procedure includes instructions for adding memory and replacing your battery. Step 1: Removing the Battery 1 Shut down your MacBook Pro.
Warning: The internal components of your MacBook Pro can be hot. If you have been using your MacBook Pro, wait 10 minutes after shutting down to let the internal components cool before continuing.
Step 2: Installing Memory 1 Using a Phillips size 00 screwdriver, unscrew the memory door and remove it from the battery bay of your computer.
2 Touch a metal surface inside the computer to discharge any static electricity from your body.
3 If you already have a memory card installed in the slot, remove it. Spread the tabs in the slot away from the notches in the memory card. The card should pop up slightly. Lift the memory card to a 25-degree angle and then gently slide the card out of the memory slot. 4 Insert the memory card at a 25-degree angle. Line up the notch in the card with the small tab in the memory slot and slide the card into the slot until the gold edge is almost invisible.
5 Gently spread the small tabs in the memory slot away from the notches and push the memory card down until the two snaps on either side of the card lock into place. 25O Correctly Incorrectly inserted inserted Note: Make sure your memory is installed according to this illustration, where the gold contacts are almost completely inserted into the connector.
6 Insert any additional memory in the second slot. 7 Replace the memory door and make sure it is lying flat before screwing it into place.
Step 3: Replacing the Battery 1 Place the bottom edge of the battery in the battery compartment. Gently press the top edge of the battery down until the battery latch locks into place. 2 Reconnect the power adapter and any other cables that were attached. Making Sure Your MacBook Pro Recognizes the New Memory After installing additional memory in your MacBook Pro, check whether the computer recognizes the new memory.
To check the computer’s memory: 1 Start up your computer. 2 When you see the Mac OS desktop, choose Apple () > About This Mac. Total memory installed in your MacBook Pro The total memory includes the amount of memory that originally came with the computer plus the new memory you added. For a detailed breakdown of the amount of memory installed in your computer, open System Profiler by clicking More Info and then Memory.
5 Troubleshooting 5 If you have a problem working with your MacBook Pro, check here first for solutions and advice. When you experience a problem working with your MacBook Pro, there is usually a simple and quick solution. Be aware of the conditions that led up to the problem. Making a note of things you did before the problem occurred will help you narrow down possible causes and then find the answers you need. Note the following: Â The applications you were using when the problem occurred.
Problems That Prevent You From Using Your Computer If the computer doesn’t respond or the pointer doesn’t move  Press Command (x)-Option-Esc to force a frozen application to quit. In the dialog that appears, select the application you would like to quit and click Force Quit. Next, save your work in any open applications and restart the computer to make sure the problem is entirely cleared up.
 If that doesn’t work, try using Disk Utility to repair the disk by inserting the Mac OS X Install Disc 1 into your computer. Then restart your computer and hold down the C key as it starts up. Choose Installer > Open Disk Utility. When Disk Utility opens, follow the instructions in the First Aid pane to see if the utility can repair your disk. If using Disk Utility doesn’t work, you might need to reinstall your computer’s system software.
 If you are still unable to start up your computer, see the service and support information that came with your MacBook Pro for information about contacting Apple for service. If the display suddenly goes black or your system freezes Try restarting your system. 1 Unplug any devices that are connected to your MacBook Pro except the power adapter. 2 Hold down the Command (x) and Control keys and press the power (®) button to restart the system.
If you have a problem with an application  For problems with software from a manufacturer other than Apple, contact the manufacturer. Software manufacturers often provide software updates on their websites.  You can configure your MacBook Pro to automatically check for and install the latest Apple software using the Software Update pane of System Preferences. For more information, choose Help > Mac Help from the menu bar and search for “Software Update.
 See AirPort Help (choose Help > Mac Help, then choose Library > AirPort Help from the menu bar) and the instructions that came with the wireless device for more information. If your computer’s hard disk is not recording data correctly  In a few instances, if the hard disk undergoes unusually strong vibration, the Sudden Motion Sensor might become active and cause dropped frames or unrecorded portions of sound or data when the disk is recording intensively.
 Open the Network pane of System Preferences and verify the information entered there with your Internet service provider (ISP) or network administrator. If you have a problem using your computer or working with the Mac OS  If the answers to your questions are not in this manual, choose Help > Mac Help from the menu bar and search for instructions and troubleshooting information.  Check the Apple Support website at www.apple.com/support for the latest troubleshooting information and software updates.
6 After selecting the destination disk for installation, continue following the onscreen instructions. Your computer might restart and ask you to insert the next Mac OS X installation disc. Note: To restore Mac OS X on your computer to the original factory settings, click Options in the Select a Destination pane of the Installer, and then select Erase and Install. After selecting the destination disk for installation, continue following the onscreen instructions for a basic installation of Mac OS X.
Note: To install iCal, iChat AV, iSync, iTunes, Safari, and the iLife applications, follow the instructions in “Installing Mac OS X and Applications” on page 99. You might need to insert the Mac OS X Disc 2, depending on the applications you select to install. Using Apple Hardware Test You can use Apple Hardware Test to help determine if there is a problem with your computer’s hardware. To use Apple Hardware Test: 1 Disconnect all external devices from your computer except the power adapter.
Installing Xcode Tools To install just the Xcode Tools, which are intended for software developers to use, follow these steps: 1 Insert the Mac OS X Install Disc 1 that came with your computer. 2 Double-click Xcode Tools. 3 Double-click XcodeTools.mpkg. 4 Follow the onscreen instructions.
Specifications A Appendix A You can use System Profiler to find out detailed information about your MacBook Pro. You can find out the amount of built-in memory, hard disk size, devices connected, and the product serial number. To access the information in System Profiler, choose Apple () > About This Mac from the menu bar and then click More Info, or open System Profiler, located in Applications/Utilities. Click the triangles in the window to show and hide information in the different categories.
Operating Environment  Operating temperature: 50° F to 95° F (10° C to 35° C)  Altitude: 3048 m (10,000 ft.) maximum  Relative humidity: 0% to 90% noncondensing Power Adapter  Input: AC 100–240 volts (V), 50/60 hertz (Hz)  Output: DC 18.5 V @ 4.6 A;16.5 V @ 3.6 A Battery  Output: DC 10.8 V  Capacity: 60 Wh Additional information is available on the Internet at www.apple.com/macbookpro and www.apple.com/support.
Safety, Use, and Care Information B Appendix B Read this important MacBook Pro safety and maintenance information. Apple products are designed and evaluated to the latest standards for safety of information technology equipment. However, to ensure safe usage, it is important that safety instructions marked on the product and in the documentation are followed.
 You want to remove any parts.  The power cord or plug becomes frayed or otherwise damaged.  You spill something into the case.  Your computer is exposed to rain or any other excess moisture.  Your computer has been dropped or the case has been otherwise damaged.  You suspect that your computer needs service or repair.  You want to clean the case (use only the recommended procedure described later).  The MacBook Pro power adapter port contains a magnet.
The power adapter may become hot during normal use of your MacBook Pro. Always allow adequate ventilation around the adapter and use care when handling during or immediately after operation. Never force a connector into a port. Check for obstructions on the port. If the connector and port don’t join with reasonable ease, they probably don’t match. Make sure that the connector matches the port and that you have positioned the connector correctly in relation to the port.
Warning: Do not place your MacBook Pro on a pillow or other soft material when it is on, as the material can block the airflow vents, in particular the rear vents, and cause the computer to overheat. Never place anything over your keyboard when operating in closed-lid mode. This can cause your computer to cycle on and off which might create excessive heat and drain your battery. Never turn on your computer unless all of its internal and external parts are in place.
Cleaning Your MacBook Pro Follow these general rules when cleaning the outside of your computer and its components: Â Shut down your MacBook Pro, unplug the power adapter, and remove the battery. Â Use a damp, soft, lint-free cloth to clean the computer’s exterior. Avoid getting moisture in any openings. Do not spray liquid directly on the computer. Â Don’t use aerosol sprays, solvents, or abrasives.
Laser Information Warning: Making adjustments or performing procedures other than those specified in your equipment’s manual may result in hazardous radiation exposure. Do not attempt to disassemble the cabinet containing the laser. The laser beam used in this product is harmful to the eyes. The use of optical instruments, such as magnifying lenses, with this product increases the potential hazard to your eyes. For your safety, have this equipment serviced only by an Apple-authorized service provider.
Understanding Ergonomics Here are some tips for setting up a healthy work environment. Keyboard and Trackpad When you use the keyboard and trackpad, your shoulders should be relaxed. Your upper arm and forearm should form an angle that is slightly greater than a right angle, with your wrist and hand in roughly a straight line. This Not this Use a light touch when typing or using the trackpad and keep your hands and fingers relaxed. Avoid rolling your thumbs under your palms.
Change hand positions often to avoid fatigue. Some computer users might develop discomfort in their hands, wrists, or arms after intensive work without breaks. If you begin to develop chronic pain or discomfort in your hands, wrists, or arms, consult a qualified health specialist. Chair An adjustable chair that provides firm, comfortable support is best. Adjust the height of the chair so your thighs are horizontal and your feet flat on the floor.
Built-in Display Adjust the angle of the display to minimize glare and reflections from overhead lights and windows. Do not force the display if you meet resistance. The display is not meant to open more than 120 degrees. You can adjust the brightness of the screen when you take the computer from one work location to another, or if the lighting in your work area changes. Getting More Information Go to www.apple.com/about/ergonomics. Apple and the Environment Apple Computer, Inc.
Connecting to the Internet C Appendix C You can use your computer to browse the World Wide Web, send email to friends and family, and chat in real time over the Internet. Use this information to help you connect to the Internet. When you first start up Mac OS X, Setup Assistant helps you enter your Internet configuration information.
 Dial-up connection: Your computer is connected to an external modem that is plugged into a phone wall jack using a phone cable. Before you connect to the Internet: 1 Set up an account with an Internet service provider (ISP). 2 Gather the connection information you need from your ISP or network administrator. See the next section, “Gathering the Information You Need,” to find out what information to get for each type of connection.
4 Turn on your computer and enter information in Setup Assistant to configure your Internet connection. Note: If you already started up your computer and did not use Setup Assistant to configure your Internet connection, see “Using Network Setup Assistant to Connect” on page 119. Gathering the Information You Need You can write the information you get from your ISP, your network administrator, or your other computer on these pages, and then enter it in Network Setup Assistant.
To set up a DSL modem, cable modem, LAN, or AirPort Extreme wireless connection, choose your connection method (ask your administrator or your ISP, if you don’t know):  Manually  Using DHCP with a manual address  Using DHCP  Using BootP  PPP If you’re unsure which method to use, “Using DHCP” might be a good choice, because the network supplies most of the required information for you automatically.
If you selected “PPP” (for PPPoE connection), gather the following:  Service provider  Account name  Password  PPPoE service name The information below might be optional. Ask your ISP or system administrator whether you need it.  DNS servers  Domain name  Proxy server Entering Your Information After gathering your specific setup information from your ISP or network administrator, you can use Network Setup Assistant to connect or enter the information manually.
4 Follow the onscreen instructions. More information about setting up an Internet connection is available in Mac Help. Choose Help > Mac Help and search for “connecting to the Internet.” Manually Entering Information To enter your information manually: 1 Open System Preferences > Network.
Troubleshooting Your Connection If you have trouble with your Internet connection, you can try the steps in this section for your type of connection or you can use Network Diagnostics. To use Network Diagnostics: 1 Choose Apple () > System Preferences. 2 Click Network and then click “Assist me.” 3 Click Diagnostics to open Network Diagnostics. 4 Follow the onscreen instructions.
Turn the modem off and on and reset the modem hardware Cycle the power on your DSL or cable modem by turning it off for a few minutes and then turning it back on. Some ISPs recommend that you unplug the modem’s power cord. If your modem has a reset button, you can press it either before or after cycling the power. PPPoE Connections If you are unable to connect to your ISP using PPPoE, first check the cables and power supplies, and then turn the modem off and on again and reset the modem hardware.
Network Connections If you have two or more computers attempting to share an Internet connection, be sure that your network is set up properly. You need to know if your ISP provides only one IP address or if it provides multiple IP addresses, one for each computer. If only one IP address is used, then you must have a router capable of sharing the connection, also known as network address translation (NAT) or “IP masquerading.
Top Ten Questions D Appendix D Do you have a question? Here are the top ten questions commonly asked by new MacBook Pro users. My Internet connection doesn’t seem to be working. How do I set it up? There are different types of Internet connections. For example, you can connect using a modem, a DSL connection, a wireless AirPort connection, or an Ethernet network. You will need to supply Mac OS X with specific information about your connection type, Internet service provider, or network.
How do I set up my printer? Is it compatible with my MacBook Pro? Begin by connecting your printer and installing any software according to the instructions that came with your printer. Next, open System Preferences and click the Print & Fax icon. Use the Print & Fax pane to configure your MacBook Pro to access the printer. You’ll find lots of information about setting up printers in Mac Help (choose Help > Mac Help from the menu bar and search for “printer”).
How does the Mac OS X interface work? Users new to Mac OS X often have questions about how to carry out certain tasks. Your best source for Mac OS X information is Mac Help. You’ll find introductory explanations for new users, users switching from Windows computers, and users upgrading from Mac OS 9. Open Mac Help by choosing Help > Mac Help from the Help menu in the menu bar at the top of your screen. Browse the new Mac OS X user information listed there.
I put a disc in my optical drive, but nothing happened. How do I know if the disc is compatible with my optical drive? Press the Media Eject (C) key to eject the disc. Apple slot-loading optical drives support only round 12 cm discs. Nonstandard discs and discs with noncircular shapes do not work in the optical drive. For more information about nonstandard discs, go to the Apple Service & Support website at www.apple.com/support and search for “nonstandard discs.
To connect an external display or projector with a VGA connection to your computer: 1 Turn on the external display or projector. 2 Make sure the display cable is connected to the external projector or display. 3 Connect the DVI to VGA adapter that came with your MacBook Pro to the VGA connector of the external display or projector, and then connect the adapter to your MacBook Pro. Your MacBook Pro automatically detects the external display.
My application or Mac OS X doesn’t seem to be working correctly. Do I need to reinstall Mac OS X? The process of troubleshooting a problem requires that you answer several questions, such as whether a problem always happens with a specific application, is related to your operating system, or is a result of faulty hardware. Before you reinstall, see “Troubleshooting” on page 93 to help analyze the problem.
Communications Regulation Information Compliance Statement This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. See instructions if interference to radio or television reception is suspected.
Responsible party (contact for FCC matters only): Apple Computer, Inc. Product Compliance, 1 Infinite Loop M/S 26-A, Cupertino, CA 95014-2084, 408-974-2000. Wireless Radio Use This device is restricted to indoor use due to its operation in the 5.15 to 5.25 GHz frequency range to reduce the potential for harmful interference to cochannel Mobile Satellite systems. Cet appareil doit être utilisé à l’intérieur.
Korea Statements VCCI Class B Statement Singapore Wireless Certification Taiwan Wireless Statements External USB Modem Information When connecting your MacBook Pro to the phone line using an external USB modem, refer to the telecommunications agency information in the documentation that came with your modem. ENERGY STAR® Compliance As an ENERGY STAR® partner, Apple has determined that standard configurations of this product meet the ENERGY STAR® guidelines for energy efficiency.
Disposal and Recycling Information The backlight lamp in this product contains mercury. Dispose according to local, state, and federal laws. For information about Apple’s recycling program, go to www.apple.com/environment/summary.html. Taiwan: European Union—Disposal Information: Battery Disposal Information Dispose of batteries according to your local environmental laws and guidelines. Deutschland: Das Gerät enthält Batterien. Diese gehören nicht in den Hausmüll.
Index Index A about your battery 24 AC plug 8, 9, 30 AC power adapter.
connecting Bluetooth enabled devices 64 a cable modem 10 a DSL modem 10 to an Ethernet network 10 an external display 69 external devices 54 FireWire devices 57 flat-panel display 71 headphones 49 to the Internet 15 a monitor or TV 128 a printer 48 a projector 69 a TV 70 two computers 58, 60 USB printers 54 a VCR 70 a video device 70 video cameras 57 wirelessly 62 conserving battery power 127 controls brightness 19 keyboard 19 volume 19 cord, AC power 9 136 Index D Dashboard 19, 44 Dashboard & Exposé pre
Force Quit 47 frozen application 47 function key 19 G general safety 105 green light 30 H hand positions 111 hard disk 98 headphone jack 71 port 21, 71 heat 107, 129 Hi-Speed USB 21 I iChat buddy icon 42 help 41 using built-in iSight 39 videoconferencing 41 image size 29 iMovie HD 40 infrared receiver.
optical digital audio out port 21 optical drive about 17 compatible discs 128 disc sizes supported 72 P password, resetting 96, 129 Photo Booth 39 playing CDs 72 DVD-Video discs 74 plug, AC 8, 9, 30 Point-to-Point Protocol (PPP) 120 port audio line in 21 DVI 21 Ethernet 21 external monitor 21 FireWire 21 headphone 21, 71 power adapter 21 USB 21 power adapter plugging in 106 port 21 using 30 power button 11, 17 PPP. See Point-to-Point Protocol PPPoE connections 119, 122 138 Index presentation mode.
stopping an application 47 the computer 23 storing your MacBook Pro 108 Sudden Motion Sensor 76 SuperDrive 72 System Preferences 45 Appearance 45 Bluetooth 65, 80 Dashboard & Exposé 45 Desktop & Screen Saver 46 Dock 46 Energy Saver 80 Energy Saver preferences 22 Network 80 Print & Fax 48 Software Update 48 Startup Disk 58 turning off IR reception 38 T telephone dial-up connection 117 Index trackpad described 17 scrolling 32 tips 31, 32 using 11 transferring files or documents 50 information 58, 60 troubl
