Congratulations, you and your Mac Pro were made for each other.
Say hello to your Mac Pro www.apple.com/macpro Finder Browse your files like you browse your music with Cover Flow. Mac Help finder Mail Manage all your email accounts in one place. iCal and Address Book Keep your schedule and your contacts in sync.
Mac OS X Leopard www.apple.com/macosx Time Machine Automatically back up and restore your files. Quick Look Instantly preview your files. Spotlight Find anything on your Mac. Mac Help quick look Mac Help spotlight iPhoto Organize and search your photos by faces, places, or events. iMovie Make a greatlooking movie in minutes or edit your masterpiece. GarageBand Learn to play. Start a jam session. Record and mix your own song. iWeb Create custom websites and publish them anywhere with a click.
Contents Chapter 1: Ready, Set Up, Go 11 Setting Up Your Mac Pro 19 Putting Your Mac Pro to Sleep or Shutting It Down Chapter 2: Life with Your Mac Pro 22 24 26 28 30 32 Basic Features on the Front of Your Mac Pro Features of Your Apple Keyboard Ports and Connectors on the Back of Your Mac Pro More Ports and Connectors on the Back Internal Expansion Options Getting Answers Chapter 3: Making a Good Thing Better 37 41 59 69 74 Opening the Mac Pro Installing Memory Installing Internal Storage Devices Addin
Chapter 4: Problem, Meet Solution 78 81 82 82 83 86 89 90 91 92 94 Problems with Your Mac Pro Problems with Software Keeping Your Software Up to Date Problems with AirPort Wireless Communication Problems with Your Display Problems with Your Internet Connection Using Apple Hardware Test Reinstalling the Software That Came with Your Mac Pro Maximizing Ethernet Performance Learning More, Service, and Support Locating Your Serial Number Chapter 5: What’s Under the Hood 96 Specifications Chapter 6: Last, but
Looking for Something? 120 Index Contents 7
1 1 Ready, Set Up, Go www.apple.
Your Mac Pro features the latest computer technology, including advanced multicore processor technology, high-speed memory, PCI Express graphics and expansion slots, and internal storage, all in an anodized aluminum chassis with easy access to internal components. WARNING: To avoid injury, read all the installation instructions (and the safety information starting on page 106) carefully before you first use your Mac Pro.
Setting Up Your Mac Pro Your Mac Pro is designed so that you can set it up quickly and start using it right away. Follow the steps on the next few pages to get started. Step 1: Position your Mac Pro and display. Pick up your Mac Pro by both of its handles using correct lifting techniques. Use correct lifting techniques when positioning your display as well.
Step 2: Plug in the power cord. Plug the power cord completely into the recessed power cord socket on the back of your Mac Pro and plug the other end into a grounded outlet or a grounded power strip.
Step 3: Connect the display. Connect your display as shown in the illustration below. Depending on the display, you may have one or more cables to connect. Check the instructions that came with the display for additional setup information.
You can connect displays with Mini DisplayPort or Digital Visual Interface (DVI) connectors to the display ports on the back of your Mac Pro. The DVI port is a dual-link port, so you can connect a 30-inch Apple Cinema HD Display.
Step 4: Connect an Ethernet cable. To access the Internet or a network, connect one end of an Ethernet cable to either of the gigabit Ethernet ports on the back of your Mac Pro. Connect the other end to a cable modem, DSL modem, or Ethernet network. Gigabit Ethernet ports To use a dial-up connection, you need the external Apple USB Modem, available from the online Apple Store at www.apple.com/store or from an Apple Authorized Reseller.
Step 5: Connect the USB cable from your keyboard and mouse. Connect the keyboard cable to one of the USB (d) ports on your Mac Pro or on the display. Plug the mouse cable into a USB port on the keyboard.
If the keyboard cable isn’t long enough, use the keyboard extension cable that came with your Mac Pro. Apple keyboard extension cable If you purchased an Apple Wireless Keyboard or Mouse, follow the instructions that came with the keyboard and mouse to set them up. Step 6: Turn on your Mac Pro. Press the power (®) button on the front of your Mac Pro to turn it on. If your display must be turned on separately, turn it on by pressing its power button. Step 7: Configure your Mac Pro with Setup Assistant.
If you don’t use Setup Assistant to transfer information when you first start up, you can do it later using Migration Assistant. Go to the Applications folder, open Utilities, and double-click Migration Assistant. Step 8: Customize Your Desktop and Set Your Preferences. You can easily make your desktop look the way you want using System Preferences. Choose Apple () > System Preferences from the menu bar or click the System Preferences icon in the Dock.
 If you see a blinking question mark on the screen or a series of flashes from the status light, see Chapter 4, “Problem, Meet Solution,” on page 77. Putting Your Mac Pro to Sleep or Shutting It Down When you finish working, you can put your Mac Pro to sleep or shut it down. Putting Your Mac Pro to Sleep If you’ll be away from your Mac Pro for only a short time, put it to sleep. When your Mac Pro is in sleep, the display’s screen is dark.
Shutting Down Your Mac Pro If you won’t be using your Mac Pro for an extended period, shut it down. To turn off your Mac Pro, do one of the following: Â Choose Apple () > Shut Down. Â Press the Control and Eject keys, and then click Shut Down in the dialogue box that appears. NOTICE: Do not turn off your Mac Pro by turning off the switch on a power strip or by unplugging your Mac Pro’s power plug (unless you can’t turn off your Mac Pro any other way).
2 2 Life with Your Mac Pro www.apple.
Basic Features on the Front of Your Mac Pro Optical drive Status light Second optical drive (optional) f Headphone jack ® Power button FireWire 800 ports (2) 22 Chapter 2 Life with Your Mac Pro USB 2.
Optical drive Your Mac Pro has a DVD±R DL/DVD±RW/CD-RW SuperDrive, which can read CD-ROM, photo CD, audio, and DVD discs. It can write music, documents, and other files to CD-R, CD-RW, DVD±R, DVD±RW, and DVD±R Double Layer (DL) discs. To open the drive, press the Media Eject (C) key on your Apple Keyboard. If your Mac Pro has a second optical drive, press the Option and Media Eject (C) keys to open it. ® Power button Press this button to turn on your Mac Pro, put it to sleep, or wake it from sleep.
Features of Your Apple Keyboard Escape Fast Forward Decrease brightness Mute Increase brightness Volume Down Exposé Volume Up Dashboard Media Eject Caps Lock Function Play/Pause Rewind USB port (both sides) 24 Chapter 2 Life with Your Mac Pro
Escape (esc) key Press the Escape (esc) and Command (x) keys simultaneously to open Front Row. Press the Escape (esc) key to exit Front Row. Brightness keys (F1, F2) Increase ( ) or decrease ( ) the brightness of your Apple display. Exposé key (F3) Open Exposé for quick access to all your open windows. Dashboard key (F4) Open Dashboard to access your widgets. — Mute key (F10) Mute the sound coming from the built-in speaker, headphone jack, or audio ports.
Ports and Connectors on the Back of Your Mac Pro Power socket ¥ Locking latch d USB 2.
Power socket Connect the power cord that came with your Mac Pro. Don’t use ordinary power or extension cords. ¥ Locking latch Lift the latch to open the side panel and access the internal components in your Mac Pro. If you are working inside your Mac Pro and the latch is down, the optical and hard drives are locked in place. You can attach a security lock (available separately) to the latch to prevent access and secure the internal components.
More Ports and Connectors on the Back PCI Express expansion slots £ Mini DisplayPort £ DVI display port Optical digital audio out port Optical digital audio in port , Analog audio line-in port - 28 Analog audio line-out port Chapter 2 Life with Your Mac Pro
PCI Express expansion slots (3) Expand your Mac Pro by installing up to three Peripheral Component Interconnect (PCI) Express cards in the covered slots labeled 2, 3, and 4. £ Mini DisplayPort Connect a display that uses a Mini DisplayPort connector, such as the Apple LED Cinema Display. Display adapters for your Mac Pro are available from the online Apple Store at www.apple.com/store.
Internal Expansion Options Optical drive carrier Hard disk drive carriers (4) Slots 2–4: PCI Express Battery Slot 1: Double-wide PCI Express graphics (graphics card installed) Memory slots (4 or 8 slots depending on model) 30 Chapter 2 Life with Your Mac Pro
Optical drives Your Mac Pro comes with one or two DVD±R DL/DVD±RW/CD-RW SuperDrives in the optical drive carrier. To replace an optical drive, see “Replacing the Optical Drive” on page 63. Hard disk drive Your Mac Pro comes with up to four hard disk drives installed in the drive carriers. To install or replace the hard disk drives, see “Installing Internal Storage Devices” on page 59. PCI Express slots Your Mac Pro has three PCI Express expansion slots.
Getting Answers Much more information about using your Mac Pro is available in Mac Help and on the Internet at www.apple.com/support/macpro. To open Mac Help: 1 Click the Finder icon in the Dock (the bar of icons along the edge of the screen). 2 Click the Help menu in the menu bar and do one of the following: a Type a question or term in the Search field, and choose a topic from the list of results or choose Show All Results to see all topics.
To learn about See Using iLife applications The iLife website at www.apple.com/ilife. Or open an iLife application, open Help, and then type a question. Changing System Preferences System Preferences by choosing Apple (K) > System Preferences. Or search for “system preferences” in Mac Help. Using your mouse or keyboard System Preferences and choose Keyboard & Mouse. Or open Mac Help and search for “mouse” or “keyboard.” Using AirPort Extreme wireless technology The AirPort Support page at www.
3 3 Making a Good Thing Better www.apple.
Use the information in this chapter to customize and expand your Mac Pro to fit your needs.
Opening the Mac Pro 1 Before you open your Mac Pro, shut it down by choosing Apple () > Shut Down. NOTICE: Always shut down your Mac Pro before opening it to avoid damaging its internal components or the components you want to install. Do not open your Mac Pro or attempt to install items inside it while it is on. 2 Wait 5 to 10 minutes to allow the internal components of your Mac Pro to cool. WARNING: Let your Mac Pro cool down before you touch the internal components, which may be very hot.
3 Touch the metal on the outside of your Mac Pro to discharge any static electricity. NOTICE: Always discharge static before you touch parts or install components inside your Mac Pro. To avoid generating static, don’t walk around the room until you finish installing the cards, memory, or internal storage device and replace the side panel. Touch the metal case to discharge static.
4 Unplug all the cables and the power cord from your Mac Pro. NOTICE: To avoid damaging internal components or the components you want to install, always unplug your Mac Pro. Don’t attempt to install items while it’s plugged in. 5 Hold the side panel and lift the latch on the back.
6 Remove the side panel by pulling the top away from your Mac Pro and lifting up. Important: When you remove the side panel, hold it securely.
Installing Memory Your Mac Pro comes with 3 or 6 GB of memory, installed as 1 GB unbuffered dual inline memory modules (UDIMMs). All installed UDIMMs must meet these specifications:  PC3-8500, 1066 MHz, DDR3 SDRAM UDIMMs  Error-correcting code (ECC)  72-bit wide, 240-pin ECC modules  36 ICs maximum per ECC UDIMM NOTICE: Apple recommends that you use Apple-approved DIMMs. DIMMs from older Mac computers cannot be used in your Mac Pro.
Before you install memory, determine whether you have a quad- or 8-core Mac Pro by removing the side panel following the instructions on page 37, and looking inside: Â A quad-core Mac Pro has one processor and four memory slots. You can install 1 GB or 2 GB DIMMs for a total of up to 8 GB of memory. See “Installing Memory in a QuadCore Mac Pro” on page 43. Â An 8-core Mac Pro has two processors and eight memory slots. You can install 1 GB, 2 GB, or 4 GB DIMMs for a total of up to 32 GB of memory.
You can also determine which Mac Pro you have by choosing Apple () > About This Mac from the menu bar. Click More Info, choose Hardware from the Contents list, and then find Number Of CPUs in Hardware Overview. A quad-core Mac Pro has one CPU and an 8-core Mac Pro has two CPUs. Installing Memory in a Quad-Core Mac Pro The quad-core Mac Pro has four memory slots, and comes with at least three 1 GB DIMMs installed. You can replace or install additional 1 GB or 2 GB DIMMs for a total of up to 8 GB of memory.
2 Push the latches on the processor tray until they partially open.
3 Pull the latches until they open all the way and release the processor tray.
4 Remove the processor tray and lay it on a soft, clean cloth on the desk or work surface, to protect the tray and avoid scratching the work surface.
If you install equal-size DIMMs (all 1 GB or all 2 GB) in your Mac Pro, Apple recommends that you fill the slots in the order listed in the table. Slot 4 Slot 3 Slot 2 Slot 1 If you have Fill these slots Two DIMMs 1 and 2 Three DIMMs 1, 2, and 3 Four DIMMs 1, 2, 3, and 4 (all) Note: If you install different-size DIMMs in your Mac Pro, follow the order in the table.
5 Open the ejectors on DIMM slots 1, 2, and 3 and push them out to the sides. Then remove the DIMMs from the slots. 6 Install the DIMMs by aligning them in the DIMM slots and pushing both ends of the DIMM down until the tabs are vertical and the ejectors snap into place. NOTICE: To avoid damaging the DIMM, hold it by the corners and don’t touch the gold connectors or other components.
7 Reinstall the processor tray, pushing it in until the latches are at a 45-degree angle. Processor tray Latch 8 Push the latches all the way in to close them and seat the processor tray.
9 Replace the side panel. Important: When you replace the side panel, make sure the latch is up. Hold the side panel securely so it stays in place as you push the latch down. Place the side panel in the slot and then push to close. NOTICE: Always replace the side panel after installing components. Your Mac Pro doesn’t operate properly without the side panel in place.
10 Hold the side panel against your Mac Pro and push the latch down to secure the side panel. 11 You can attach a lock or cable through the metal loop to secure your Mac Pro. Flip the lock tab down before you close the latch.
Installing Memory in an 8-Core Mac Pro The 8-core Mac Pro has eight memory slots, and, in most configurations, comes with at least six 1 GB DIMMs installed. You can install 1 GB, 2 GB, or 4 GB DIMMs, for a total of up to 32 GB of memory. It’s important that DIMMs installed in your Mac Pro are of equal specification. Use the instructions that follow to install DIMMs in an 8-core Mac Pro.
2 Push the latches on the processor tray until they partially open.
3 Pull the latches until they open all the way and release the processor tray.
4 Remove the processor tray and lay it on a soft, clean cloth on the desk or work surface to protect the tray and avoid scratching the work surface.
If you install equal-size DIMMs (all 1, 2, or 4 GB) in your Mac Pro, Apple recommends that you fill the slots in the order listed in the table.
Note: If you install different-size DIMMs in your Mac Pro, follow the order in the table. If the DIMM configuration you install doesn’t provide optimized performance, the Memory Slot Utility appears onscreen and recommends an improved configuration. To use the utility again, go to /System/Library/CoreServices/Memory Slot Utility. 5 Install the DIMMs by aligning them in the DIMM slots and pushing both ends of the DIMM down until the tabs are vertical and the ejectors snap into place.
6 Reinstall the processor tray, pushing it in until the latches are at a 45-degree angle. 7 Push the latches all the way in to close them and seat the processor tray. Processor tray Latch 8 Replace the side panel following the instructions on page 50. NOTICE: Always replace the side panel after installing components. Your Mac Pro doesn’t operate properly without the side panel in place.
Installing Internal Storage Devices Your Mac Pro has room for six internal drives: two optical drives and four hard disk drives. In most configurations, a single hard disk drive occupies the first hard drive bay and an optical drive is located in the top optical drive bay. You can add up to three 3.5-inch cable-free Serial ATA (SATA) hard disk drives to the empty hard drive bays or up to four Serial Attached SCSI (SAS) drives. The drives must meet these specifications:  Type: SAS or SATA 3 Gb/s  Width: 3.
To install a hard disk drive: 1 Open your Mac Pro and remove the side panel following the instructions that begin on page 37. 2 Lift the latch to unlock the hard drive carriers. Note: When the latch is down, the carriers are locked in the drive bays and can’t be removed. 3 Pull the hard drive carrier out of the drive bay.
4 Position the carrier over the hard disk drive with the connectors at the rear. 5 Use the four screws on the carrier to attach the hard disk drive to the carrier. NOTICE: Hold the drive by its sides. To avoid damaging the drive, don't touch the printed circuit board.
6 Lift the latch and slide the carrier over the guides and into the drive bay until it’s touching the hard drive connectors and is seated in the bay. Hard drive connectors 7 Replace the side panel following the instructions on page 50. NOTICE: Always replace the side panel after installing components. Your Mac Pro doesn’t operate properly without the side panel in place.
Replacing the Optical Drive Your Mac Pro comes with one or two SuperDrives installed in the optical drive bays. Follow these instructions to replace your optical drive. Important: Contact your drive manufacturer or consult the manufacturer’s website to determine if your drive is set to cable select mode. Before installation, set the drive to cable select mode if the manufacturer hasn’t already done so.
3 Pull the optical drive carrier halfway out of the optical drive bay.
4 Disconnect the cable from the optical drive and remove the carrier from the optical drive bay. NOTICE: When you install or replace optical drives, use the original Apple cables that came with your Mac Pro.
5 Remove the optical drive from the carrier by unscrewing the four attachment screws. 6 Use the four screws from the original optical drive to attach the replacement drive to the carrier.
7 Slide the optical drive and carrier over the guides halfway into the drive bay. 8 Attach the cable to the back of the drive.
9 Lift the latch and then slide the optical drive carrier into the drive bay, pushing it into place. 10 Replace the side panel following the instructions on page 50. NOTICE: Always replace the side panel after installing components. Your Mac Pro doesn’t operate properly without the side panel in place.
Adding PCI Express Cards You can expand the capabilities of your Mac Pro by installing cards in the Peripheral Component Interconnect (PCI) Express slots. Your Mac Pro has one double-wide PCI Express graphics slot and three PCI Express expansion slots, for a total of four slots. These slots accommodate PCI Express graphics cards and expansion cards.
To install a PCI Express card: 1 Open your Mac Pro and remove the side panel following the instructions that begin on page 37. WARNING: To avoid damaging internal components or the components you want to install, always turn off and then unplug your Mac Pro. Do not attempt to install items while it is plugged in. Let your Mac Pro cool down for 5 to 10 minutes before you touch the internal components, which may be very hot. 2 Unscrew the captive screws in the PCI bracket and remove the bracket.
4 Press the button on the PCI slider and move the slider to the left, which moves the retention bar. PCI slider Button Retention bar 5 Remove your new card from its static-proof bag and hold it by its corners. Don’t touch the gold connector or the components on the card. Did You Know?—Installing a Full-Length PCI Card It may be easier to install a PCI card if you remove the hard disk drives and carriers (see page 59), and remove adjacent cards.
6 Align the card’s connector with the expansion slot and press the card into the slot. PCI slider Hook on card Retention bar PCI Express slot 7 Press the card gently but firmly until the connector is fully inserted. Press only on the bare areas of the card to avoid damaging the components. Don’t rock the card from side to side or force it. If you meet resistance, check the connector and slot for damage or obstructions, and then try inserting the card again.
10 Replace the PCI bracket under the brace and tighten the screws to secure the card. NOTICE: If you remove a card and don’t install a replacement, place a port access cover over the empty slot to keep foreign objects out of the enclosure. An uncovered slot affects the airflow that cools the internal components and may cause damage. Brace PCI bracket 11 Replace the side panel following the instructions on page 50. NOTICE: Always replace the side panel after installing components.
Replacing the Internal Backup Battery Your Mac Pro uses a BR 2032 Lithium battery that preserves settings, such as the date and time, when your Mac Pro is off. If you notice intermittent problems when your Mac Pro starts up or changes in the date and time settings, replace the battery. Important: Dispose of the old battery according to your local environmental laws. To replace the battery: 1 Open your Mac Pro and remove the side panel, following the instructions on page 37.
4 Insert the new battery in the holder with the positive (+) side facing up. 5 Replace the PCI Express cards that you removed (see page 69). 6 Replace the side panel and push the latch down to secure it.
4 4 Problem, Meet Solution www.apple.
Occasionally you may have problems while working with your Mac Pro. Read on for troubleshooting tips to try when you have a problem. You can also find more troubleshooting information in Mac Help or on the Mac Pro Service & Support website at www.apple.com/support/macpro. If you experience a problem working with your Mac Pro, there is usually a simple and quick solution. If you encounter a problem, try to make a note of what you did before the problem occurred.
Then try to cancel what the computer is doing. Â Press the Command (x) and Q keys at the same time to try to quit the current application. Â Press the Command (x) and period keys at the same time. If a dialog appears, click Cancel. Â Choose Apple () > Force Quit and select the application you want to quit. You can also force quit by pressing the Esc, Option, and Command (x) keys at the same time. Restart your Mac Pro by choosing Apple () > Restart to be sure the problem is entirely cleared up.
3 Select your hard disk. The PRAM is reset to the default values and your clock settings may need to be reset. Â If your computer does not start up after resetting the PRAM, restart your computer while holding down the Option key to select your startup disk. Â If this doesn’t work, restart your computer while holding down the Shift key. If you are unable to eject a disc A file on the disc may be in use. Quit applications that are open, and then try again.
 One short flash followed by a longer off period: No valid memory.  Three short flashes followed by a longer off period: Failed memory. Problems with Software When an application freezes or does not respond, Mac OS X provides a way to quit the application without restarting your computer. Quitting a frozen application may allow you to save your work in other open applications. To force an application to quit: 1 Press Command (x)-Option-Esc or choose Apple () > Force Quit from the menu bar.
Keeping Your Software Up to Date You can connect to the Internet and automatically download and install the latest free software versions, drivers, and other enhancements from Apple. When you are connected to the Internet, Software Update checks to see if any updates are available for your computer. You can set your Mac Pro to check for updates periodically, and then you can download and install updated software. To check for updated software: 1 Choose Apple () > Software Update.
 Make sure the computer or network you are trying to connect to is running and has a wireless access point.  Make sure you are within antenna range of the other computer or the network’s access point. Nearby electronic devices or metal structures can interfere with wireless communication and reduce this range. Repositioning or rotating the computer may improve reception.  Make sure the side panel is closed (see page 50) and the PCI port access covers are in place (see page 73).
If no image appears on the screen  Make sure the computer is turned on, and if the display has a power button, make sure it is turned on.  Make sure the cables are connected properly to your computer and the display.  If your graphics card has an internal power cable, make sure it’s connected to the card and the logic board.  Make sure your computer is not in sleep. Press the power button or any key to see if the computer wakes.  Make sure the display brightness and contrast are set properly.
 The flickering may be caused by interference from a nearby power line, a fluorescent light, or an electrical device—for example, a radio, a microwave oven, or another computer. Try relocating nearby electrical devices or moving your computer and display. If no colors appear on the screen or the colors don’t look right  Make sure the display is connected firmly to the computer.  Open the Displays pane of System Preferences and make sure the display is set to display millions of colors.
If your display has a light on the front and it’s flashing On some Apple flat panel displays, the power light displays a series of short flashes when an error is detected. Â If you see a repeating sequence of three short flashes, the display is detecting input in the wrong video format. Make sure your display is compatible with your graphics card and that you’ve installed the correct display software, if your display came with installation software.
Cable Modem, DSL, and LAN Internet Connections Make sure all modem cables are fully plugged in, including the modem power cord, the cable from the modem to the computer, and the cable from the modem to the wall jack. Check the cables and power supplies for Ethernet hubs and routers. Turn the modem off and on to reset the modem hardware. Turn off your DSL or cable modem for a few minutes, and then turn it back on. Some ISPs recommend that you unplug the modem’s power cord.
Network Connections Make sure the Ethernet cable is plugged into your computer and into the network. Check the cables and power supplies to your Ethernet hubs and routers. If you have two or more computers sharing an Internet connection, be sure that your network is set up properly. You need to know if your ISP provides only one IP address or if it provides multiple IP addresses, one for each computer.
Using Apple Hardware Test If you suspect a problem with your Mac Pro hardware, use the Apple Hardware Test application to help determine if there’s a problem with one of the computer’s components, such as the memory or processor. To use Apple Hardware Test: 1 Disconnect all external devices from your Mac Pro, except the keyboard and mouse. If you have an Ethernet cable connected, disconnect it. 2 Restart your Mac Pro while holding down the D key.
Reinstalling the Software That Came with Your Mac Pro Use the software installation discs that came with your Mac Pro to reinstall Mac OS X and any applications that came with your computer. You can choose “Archive and Install,” which saves your existing files and settings, or “Erase and Install,” which erases all your data. Important: Apple recommends that you back up the data on your hard disk before restoring software.
Installing Applications If you reinstall Mac OS X on your computer and select the “Erase and Install” option, you must reinstall the applications that came with your computer, such as the iLife applications. To install the applications that came with your computer: 1 Back up your important files. 2 Insert the Applications Install DVD that came with your computer. 3 Double-click Install Bundled Software. 4 Follow the onscreen instructions. 5 When the installation is complete, click Close.
Note: If you connect your computer directly to a configurable Ethernet switch, have your network administrator disable the spanning tree protocol on that port. Otherwise your computer may duplicate the AppleTalk address of another computer on the same network and both network connections may become unreliable. Learning More, Service, and Support If your Mac Pro needs service, take it to an Apple Authorized Service Provider or contact Apple for service.
System Profiler To get information about your computer, use System Profiler. System Profiler shows you which hardware and software is installed, the serial number and operating system version, how much memory is installed, and more. To open System Profiler, choose Apple () > About This Mac from the menu bar and then click More Info. Apple Hardware Test You can use Apple Hardware Test to diagnose hardware problems on your Mac Pro. For more information, see “Using Apple Hardware Test” on page 89.
Note: Your 90 days of complimentary telephone support begins on the date of purchase. Telephone fees may apply. Country Phone Website United States 1-800-275-2273 www.apple.com/support Australia (61) 1-300-321-456 www.apple.com/au/support Canada (English) (French) 1-800-263-3394 www.apple.com/ca/support www.apple.com/ca/fr/support Ireland (353) 1850 946 191 www.apple.com/ie/support New Zealand 00800-7666-7666 www.apple.com/nz/support United Kingdom (44) 0870 876 0753 www.apple.
5 5 What’s Under the Hood www.apple.
The technical specifications of your Mac Pro are included in this section. Specifications Use System Profiler to find detailed information about your Mac Pro, including the amount of installed memory, hard disk size, connected devices, and product serial number. To open System Profiler, choose Apple () > About This Mac from the menu bar, and then click More Info.
Graphics Card PCI Express 2.0 graphics card with a dual-link Digital Visual Interface (DVI) connector and a Mini DisplayPort connector. Video Display Modes For technical specifications for your display:  Apple displays: Go to www.apple.com/displays  Non-Apple displays: Go to www.apple.com/guide Storage  Four independent 3 Gb/s Serial ATA (SATA), cable-free, direct-attach 3.5-inch hard drive bays  Type: SATA 3 Gb/s  Width: 3.9 inches (102 mm)  Depth: 5.7 inches (147 mm)  Height: 1.0 inch (25.
PCI Express Expansion  Four full-length PCI Express expansion slots (slot 1 contains the graphics card)  Slots 1 and 2 are x16, PCI Express 2.0 slots  Slots 3 and 4 are x4, PCI Express 2.
 DVD±RW  DVD±R DL USB Specifications  Support for Universal Serial Bus (USB) 2.0 and 1.1  Seven external USB Type A ports  Two USB 2.0 ports on the front  Three USB 2.0 ports on the back  Two USB 2.0 ports on the Apple Keyboard  Each USB port (front and rear) is on a separate 480 megabit-per-second (Mbit/s) USB channel  500 milliamperes (mA) available for a total of 1.5 A on the rear and 1.
Ethernet Specifications  IEEE 802.3 compliant  Maximum cable length: 328 feet (100 meters)  Protocols: Open Transport, AppleShare, AppleTalk, NetWare for Macintosh, TCP/IP  Connector: RJ-45 for 10Base-T, 100Base-TX, and 1000Base-T  Media, 10Base-T: Category (CAT) 3 or higher UTP on 2 pairs up to 100 m  Media, 100Base-TX: CAT 5e UTP on 2 pairs up to 100 m  Media, 1000Base-T: CAT 5e UTP on 4 pairs up to 100 m  Channel speeds: IEEE Autonegotiation of 10Base-T, 100Base-TX, and 1000Base-T Bluetooth 2.
Optical Digital Audio Specifications  Data format: Sony/Phillips Digital Interface (S/PDIF) protocol (IEC60958-3)  Connector type: TOSLINK optical (IEC60874-17)  Bits per sample: 16-bit, 20-bit, or 24-bit Optical digital audio out Based on a typical situation with playback of a 1 kHz, 0dBFS 24-bit sine wave, 44.1 kHz output sample rate, unless otherwise specified below.  Output sample rate: 44.
Analog audio out using the headphone jack (typical values) Based on a typical situation with playback of a 1 kHz, -3dBFS 24-bit sine wave, 44.1 kHz output sample rate into 150 ohms, unless otherwise specified below.  Output voltage: 1.3 volts (root mean square) (Vrms) (+4.5 dBu)  Output impedance: 55 ohms  Output power: 53 milliwatts (mW) into 32 ohms  Signal-to-noise ratio: Greater than 90 dB  Total harmonic distortion + noise: Less than -70 dB (.
 Signal-to-noise ratio: Greater than 90 dB  Total harmonic distortion + noise: Less than -85 dB (.006 percent)  Channel separation: Greater than 85 dB External microphone input using the headphone jack (typical values) Based on a typical situation with playback of a 1 kHz, 28 mVrms sine wave, 44.1 kHz input sample rate, 24-bit sampling, unless otherwise specified below.
FireWire devices The computer can provide up to 28 W total to the FireWire ports. System Clock and Battery Your computer has CMOS custom circuitry with a long-life battery. Battery Use a 3-volt, BR 2032 Lithium coin cell replacement battery (see “Replacing the Internal Backup Battery” on page 74). Dimensions and Operating Environment Dimensions  Weight: 39.9 lbs. (18.1 kg) The weight depends on the configuration.
6 6 Last, but Not Least www.apple.
This chapter provides important information about safety procedures, routine maintenance, and ergonomic considerations for using your Mac Pro and display. For your safety and that of your equipment, follow these rules for handling and cleaning your Mac Pro and for working more comfortably. Keep these instructions handy for reference by you and others. NOTICE: Incorrect storage or use of your computer may void the manufacturer’s warranty.
 Your computer or display is exposed to rain or any other excess moisture  Your computer or display has been dropped or the case has been otherwise damaged  You suspect that your computer or display needs service or repair  You want to clean the computer or the case or screen of the display If you plan to store your computer for an extended period of time, remove the battery. For service or questions about your warranty, contact an Apple Authorized Service Provider or Apple.
5 Wipe the computer or display case surfaces lightly with a clean, soft cloth dampened with water. NOTICE: Don’t use alcohol, aerosol sprays, solvents, or abrasives that might damage the finish on the case. Protecting Your Optical Drive To keep your optical drive working properly: Â Position your computer so that the drive tray doesn’t bump into anything when it opens. Â Close the drive when you’re not using it. Â Do not put anything on the drive tray when it is open.
Maintaining Your Display To maintain your display and ensure its long life: Â Do not press on the surface of the display screen. Â Do not write on the screen or touch the screen with a sharp object. Â If you will not be using your computer for a day or more, turn off the computer and, if the display has a power button, turn off the display. You can also use Energy Saver.
Mouse Position the mouse at the same height as the keyboard and within a comfortable reach. Chair An adjustable chair that provides firm, comfortable support is best. Adjust the height of the chair so your thighs are horizontal and your feet are flat on the floor. The back of the chair should support your lower back (lumbar region). Follow the manufacturer’s instructions for adjusting the backrest to fit your body properly.
Position the display to minimize glare and reflections on the screen from overhead lights and nearby windows. If possible, use a tiltable display stand. The stand lets you set the display at the best angle for viewing, helping to reduce or eliminate glare from lighting sources you can’t move. Shoulders relaxed Top of the screen at or slightly below eye level (You may need to adjust the height of your display by raising or lowering your work surface) 18–28 in.
Avoid Hearing Damage WARNING: Permanent hearing loss may occur if earbuds or headphones are used at high volume. You can adapt over time to a higher volume of sound that may sound normal but can be damaging to your hearing. If you experience ringing in your ears or muffled speech, then stop listening and have your hearing checked. The louder the volume, the less time required before your hearing can be affected.
Regulatory Compliance Information Compliance Statement This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. See instructions if interference to radio or television reception is suspected.
Responsible party (contact for FCC matters only): Apple Inc. Corporate Compliance 1 Infinite Loop, MS 26-A Cupertino, CA 95014-2084 Europe–EU Declaration of Conformity See www.apple.com/euro/compliance. Korea Warning Statements Wireless Radio Use This device is restricted to indoor use due to its operation in the 5.15 to 5.25 GHz frequency range to reduce the potential for harmful interference to cochannel Mobile Satellite systems. Cet appareil doit être utilisé à l’intérieur.
VCCI Class B Statement Mouse Class 1 LED Information The Apple Mouse is a Class 1 LED product in accordance with IEC 60825-1 A1 A2. It also complies with the Canadian ICES-003 Class B Specification. External USB Modem Information When connecting your Mac Pro to the phone line using an external USB modem, refer to the telecommunications agency information in the documentation that came with your modem.
ENERGY STAR® Compliance As an ENERGY STAR® partner, Apple has determined that standard configurations of this product meet the ENERGY STAR® guidelines for energy efficiency. The ENERGY STAR® program is a partnership with electronic equipment manufacturers to promote energy-efficient products. Reducing energy consumption of products saves money and helps conserve valuable resources. This computer is shipped with power management enabled with the computer set to sleep after 10 minutes of user inactivity.
European Union—Disposal Information The symbol above means that according to local laws and regulations your product should be disposed of separately from household waste. When this product reaches its end of life, take it to a collection point designated by local authorities. Some collection points accept products for free.
Looking for Something?
Index 120 A audio specifications 101 adapter Apple Mini DisplayPort to VGA Adapter 14 DVI to ADC 14 DVI to VGA 14 AirPort Extreme about 33 specifications 100 analog audio line in 29 line out 29 specifications 101 AppleCare Service and Support 93 Apple Hardware Test 93 Apple Keyboard 25 applications force quit 79 freezing 81 Front Row 33 iLife 91 installing 91 problems 81 assistants Migration Assistant 18 Setup Assistant 17 B Looking for Something? battery disposal 116 internal backup battery 31 repla
computer 116 Dock 32 downloading software 82 DVD 98 DVI display port 29 E environmental impact 112 ergonomics 109 mouse 110 Escape key 25 Ethernet maximizing performance 91 ports 27 specifications 100 expansion cards 103 Exposé key 25 external USB modem 15, 23, 27 F F1 to F19 function keys 25 factory settings 90 Finder 32 FireWire connections 33 devices 104 ports 27 specifications 99 Force Quit 81, 85 Front Row application 33 key 25 frozen application 81 function (fn) key 25 G general maintenance 107 gr
Migration Assistant 18 modem cable 27 DSL 27 external USB 15, 23, 27 mouse cleaning 109 connecting 16 ergonomics 110 USB connection 23, 27 wireless 17 Mute key 25 N network connections 88 diagnostics 86 no image on screen 84 O online resources 92 opening your Mac Pro 37 operating environment 104 optical digital audio ports 29 specifications 101 optical drive about 23, 31 installing 59 specifications 98 122 Looking for Something? P PCI Express expansion slots 29, 31 graphics card 31 installing cards 69
JEDEC 41, 96 memory 96 optical digital audio 101 optical drive 98 PCI Express cards 103 peripherals 103 power supply 103 processor 96 SuperDrive 98 system clock 104 System Profiler 33, 96 static, discharging 38 status light 23, 80 stopping an application 81 SuperDrive about 23, 31 replacing 63 specifications 98 system clock 104 System Preferences customizing the desktop 18 Software Update 82 System Profiler 33, 82, 96 T telephone support 94 transferring information 17 troubleshooting AppleCare 93 applicati
K Apple Inc. © 2009 Apple Inc. All rights reserved. Under the copyright laws, this manual may not be copied, in whole or in part, without the written consent of Apple. The Apple logo is a trademark of Apple Inc., registered in the U.S. and other countries. Use of the “keyboard” Apple logo (Option-Shift-K) for commercial purposes without the prior written consent of Apple may constitute trademark infringement and unfair competition in violation of federal and state laws.
