Owner's Manual

073-1246 Rev. C 7
© 2009, 2010 Apple Inc. All rights reserved.
Installing the
Replacement
DIMM
1 Align DIMM in slot on
processor board.
2 Push both ends of
DIMM down until
ejectors snap back up
into place.
Note: If a black sticker
covers barcode label on
DIMM you are replacing,
remove sticker before
returning DIMM to Apple.
(Service DIMMs do not
include black sticker.)
3 Holding processor
tray by latches, lower
it back into computer.
4 Make sure latches are
closed ush with front
of processor tray.