Owner's Manual

073-1249 Rev. B 8

Important: The following

step is critical for correct

Bluetooth performance.

11 Verify that all PCI

fence covers are

properly seated as in

step 10. Then view

alignment of covers

from rear of

enclosure. If aligned

correctly, all covers

should be parallel and

show even gaps from

slot to slot. If gaps are

uneven, re-adjust

fence covers.

12 Replace PCI bracket

and tighten screws.

Note: Slide bracket

under circled tab

before securing

screws.

Correct Alignment: Covers are parallel Incorrect Alignment: Covers are not parallel