Owner's Manual
073-1249 Rev. B 6
© 2009, 2010 Apple Inc. All rights reserved.
4 Connect card’s power
cable(s) to connectors
on backplane board.
Card with 1 Cable:
Connect cable for
card in PCI slot 1 to
connector A. Connect
cable for card in slot 2
to connector B.
Card with 2 Cables:
Connect both cables
to the 2 power
connectors.
Note: If more than
one card is installed,
you may nd it
easier to connect
the cable(s) to the
backplane board
before connecting
them to the card.
5 With both hands, level
card horizontally.
6 Guide card fence into
enclosure’s fence
retainer(s) and gently
rotate card toward
slot.
7 Continue lowering
card into slot. Use
both hands to press
down carefully with
an even force until
connector is inserted
all the way into slot.