Owner's Manual

073-1249 Rev. B 5
© 2009, 2010 Apple Inc. All rights reserved.
Installing the
Replacement
Card
Note: You can install
card in PCI slot 1, 2, or 3.
Installed in slot 2, it blocks
slot 3. Installed in slot 3,
it blocks slot 4. Because
of card’s height, do not
install it in slot 4.
1 Transfer original
card’s cable(s) to
replacement card.
2 Holding card with
both hands, position
fence end of card
inside enclosure just
above PCI fence cage.
3 Rotate other end of
card into correct slot
of card guide.