Owner's Manual

073-1250 Rev. B 2
© 2009, 2010 Apple Inc. All rights reserved.
Removing and
Installing the
Cable
1 Disconnect card’s
cable(s) from
backplane board.
2 Disconnect card’s
cable(s) from card.
3 Connect replacement
cable(s) to card and
backplane board.
Closing the
Computer
1 Replace access panel.
Note: Make sure
latch is up before you
replace panel. If latch
is down, panel will
not seat correctly.
2 Push latch down
to close and secure
access panel.
Warning: Never turn
on computer unless
all its internal and
external parts are in
place and it is closed.
Operating computer
when open or missing
parts can cause
damage or injury.