Specifications

Chapter 6 Managing Web Modules 77
Adding Web Modules
You can use Server Admin to add web modules to your web server.
Before you can add a web module to the server, the module must be installed. To
install a module, follow the instructions that came with the module software. The web
server loads modules from the /usr/libexec/apache2/ folder.
To add web modules to the server:
1 Open Server Admin and connect to the server.
2 Click the triangle at the left of the server.
The list of services appears.
3 From the expanded Servers list, select Web.
4 Click Settings, then click Modules.
5 Click the Add (+) button to add a module to the list of available modules.
6 In the Module Name eld, enter the module name.
7 Select the Enabled checkbox if you want the module enabled.
8 In the Module Path eld, enter the path to the installed module or click the browse
button to select the folder.
9 Click OK.
10 Click Save.
Enabling Web Modules
You can use Server Admin to enable modules for your web server.
To enable Web service modules:
1 Open Server Admin and connect to the server.
2 Click the triangle at the left of the server.
The list of services appears.
3 From the expanded Servers list, select Web.
4 Click Settings, then click Modules.
5 Scroll through the modules list to see the set of modules in use or available for use on
the web server.
6 Click the Enable checkbox next to the module you want to enable.
7 Click Save.