User Guide

TCP/IP Connection Worksheet

Complete a form in this worksheet before setup if any of the following apply:

Â Your network doesn’t have a DHCP server, such as an Internet router configured to

automatically assign IP addresses to computers on the network

Â The DHCP server isn’t configured to assign the server a static (fixed) IP address and

you want to set the server’s IP address manually

Â The server has multiple Ethernet ports

Â Your ISP requires making a PPPoE connection to access the Internet

Complete the form in this worksheet for the TCP/IP configuration method you want to

use with the server’s built-in Ethernet port. If the server has multiple Ethernet ports,

complete a copy of the form for the configuration method you want to use for each

port.

Instructions for the settings in these forms are on page 22.

TCP/IP: Configure Using DHCP with Manual IP Address

Use this form if you want to enter a static IP address and let the DHCP server assign

other TCP/IP connection settings.

TCP/IP: Configure Using DHCP

Use this form if you want the DHCP server to assign all TCP/IP settings, including the

server’s IP address. With this method, the DHCP server should be configured to assign

the server a static IP address (the same IP address all the time).

TCP/IP connection setting Your information

Interface: N Built-in Ethernet N Other:

IP address:

DNS servers (optional):

Search domains (optional):

Configure IPv6: Use “TCP/IP: Configure IPv6” on page 12

Configure Ethernet: Use “TCP/IP: Configure Ethernet” on page 12