User Guide

12
TCP/IP: Configure Lights-out Management (LOM)
Use this form if your server is an Xserve with a lights-out management (LOM) interface,
TCP/IP: Configure IPv6
Use this form if you don’t want the server to configure IPv6 addressing automatically.
TCP/IP: Configure Ethernet
Use this form if you don’t want the server to configure Ethernet port settings
automatically.
TCP/IP connection setting Your information for channel 1 Your information for channel 2
IP address:
Subnet mask:
Router:
Lights-out management administrator
Name:
Password:
TCP/IP connection setting Your information
Configure IPv6: N Automatically N Manually N Off
Configure IPv6 manually
IPv6 address:
Router IPv6 address:
Prefix length: N 64 N Other:
TCP/IP connection setting Your information
Configure Ethernet: N Automatically N Manually
Configure Ethernet manually
Speed: N Autoselect N Other:
Duplex: N Half duplex N Full duplex
MTU: N Standard (1500) N Other: