Specifications

Chapter 4 Working with AFP Service 77
Parameter Description
idleDisconnectTime
Idle time (in minutes) allowed before disconnect.
Default =
10
idleDisconnectFlag: guestUsers
Enforce idle disconnect for guest users.
Default =
yes
idleDisconnectFlag: adminUsers
Enforce idle disconnect for administrator users.
Default =
yes
idleDisconnectFlag: registeredUsers
Enforce idle disconnect for registered users.
Default =
yes
idleDisconnectFlag:
usersWithOpenFiles
Enforce idle disconnect for users with open les.
Default =
yes
idleDisconnectMsg
Idle disconnect message.
Default =
""
For more information about command-line parameters for AFP, see “AFP
Parameters” on page 143. For information about serveradmin, see its man page.
For the basics of command-line tool usage, see Introduction to Command-Line
Administration.
Starting AFP Service
You start AFP service to make AFP share points available to your client users.
To start AFP service:
1 Open Server Admin and connect to the server.
2 Click the triangle at the left of the server.
The list of services appears.
3 From the expanded Servers list, select AFP.
4 Click Start AFP (below the Servers list).
The service runs until you stop it and restarts if your server is restarted.
From the command line:
To start AFP service: m
$ sudo serveradmin start afp
For more information about command-line parameters for AFP, see “AFP
Parameters” on page 143. For information about serveradmin, see its man page.
For the basics of command-line tool usage, see Introduction to Command-Line
Administration.