Specifications
Chapter 3 Setting Up Share Points 49
Parameter Description
path The full path to the share point.
shareags A three-digit binary number indicating the
protocols used to share the folder. The digits
represent, from left to right, AFP, FTP, and SMB.
1=shared, 0=not shared.
For information about command-line parameters, see “Creating a Share Point” on
page 142. For information about sharing, see its man page. For the basics of
command-line tool usage, see Introduction to Command-Line Administration.
Viewing Share Point Conguration and Protocol Settings
You can view share point conguration and protocol settings in Server Admin from
the Share Points list.
To view the share point conguration and protocol settings on a server:
1 Open Server Admin and connect to the server.
2 Click File Sharing.
3 Click Share Points.
4 Click List to view the share point details.
You can view the share point name, path, disk space, sharing, guest access, automount,
Spotlight, and Time Machine settings.
Use tooltips to quickly display the shared and guest access protocols for a share point.
5 Select the share point and click Share Point below the list.
6 View the protocol settings by clicking Protocol Options and selecting the protocol
(AFP, SMB, FTP, or NFS).
From the command line:
To view share point settings: m
$ sudo sharing -l
For information about sharing, see its man page. For the basics of command-line
tool usage, see Introduction to Command-Line Administration.
Viewing Share Point Content and Privileges
You can use File Sharing in Server Admin to view share point content and access
privileges.
To view share point content and access privileges on a server:
1 Open Server Admin and connect to the server.
2 Click File Sharing.