User`s guide

96 Chapter 4 Initial Server Setup
6 In the Language pane, specify the language you want to use to administer the target
server.
7 Use step 8 if you want to use saved setup data. Otherwise, use step 9.
8 In the Language pane, choose File > Open Configuration File or File > Open Directory
Record to load the saved setup data you want to use. If the saved setup data is
encrypted, type the passphrase when prompted.
Optionally choose View > Jump to Review to review the setup data, then use Go Back
as necessary to change it.
9 Click Continue and enter the setup data as you move through the Assistant’s panes,
following the onscreen instructions. Make sure that any DHCP or DNS servers you
specify for the server you’re setting up to use are running.
10 After all setup data has been specified, review the summary displayed by Server
Assistant and optionally click Go Back to change data.
11 To save the setup data as a text file or in a form you can use for automatic server setup
(a saved setup file or saved directory record), click Save As.
To encrypt the file or record, select “Save in Encrypted Format” then enter and verify a
passphrase. You must supply the passphrase before an encrypted setup file can be
used by a target server.
12 To initiate setup of the remote target server, click Apply.
When server setup is complete, click Continue Now. The target server restarts
automatically and you can log in as the server administrator user created during setup
to configure services.