User`s guide

Chapter 4 Initial Server Setup 85
 The setup data is stored in the directory in a path named /AutoServerSetup/ and a
record having one of these names; target servers search for names in the order listed:
<MAC-address-of-server> (include any leading zeros but omit colons). For example,
0030654dbcef.
<IP-address-of-server>. For example, 10.0.0.4.
<partial-DNS-name-of-server>. For example, myserver.
<built-in-hardware-serial-number-of-server> (first 8 characters only). For example,
ABCD1234.
<fully-qualified-DNS-name-of-server>. For example, myserver.example.com.
<partial-IP-address-of-server>. For example, 10.0 (matches 10.0.0.4 and 10.0.1.2).
generic (a record that any server will recognize, used to set up servers that need the
same setup values). If the serial number specified in the file isn’t site licensed, after
setup you need to manually set it. Use Server Admin or the following command in
the Terminal application: serversetup -setServerSerialNumber.
 The correct passphrase is provided to the server (setup data stored in a directory
should always be encrypted).
You can use Server Assistant to supply a passphrase interactively, or you can supply
the passphrase in a text file. Place the passphrase file on a volume mounted locally
on the target server in /Volumes/*/Auto Server Setup/<pass-phrase-file>, where * is
any device mounted under /Volumes. A target server searches through volumes
alphabetically by device name.