User`s guide

Chapter 4 Initial Server Setup 111
If a local server setup fails, you can restart the computer, rerun Server Assistant, and re-
initiate setup, or you can reinstall the server software.
Handling Setup Warnings
When setup completes but a condition that warrants your attention exists, a warning
log is created as /Library/Logs/ServerAssistant.POR.status on the target server. Click the
target server’s desktop link named ServerAssistant.status to open this file.
Here are some messages you may encounter in the log:
 The server software serial number is invalid. Open Server Admin, select the server in
the Computers & Services list, click Settings, and click General. Enter the correct serial
number, and click Save.
 Because this server was set up using a generic file or directory record and the serial
number isn’t site licensed, you must enter the server software serial number using
Server Admin. Open Server Admin, select the server in the Computers & Services list,
click Settings, and click General. Enter the correct serial number, and click Save.
 The server administrator user defined in the setup data already exists on the server
you’ve upgraded.
Getting Upgrade Installation Status Information
When you perform an upgrade installation, log files may be placed on the target
server. See the information on upgrading in the upgrading and migrating guide for
information about upgrade logs.