Hardware manual

60 Appendix A Mac OS X Server Worksheet
“Using DHCP
with Manual IP
address”
Specify these settings if you want to use a DHCP server
to assign a static IP address and optionally other settings
for the port. Make sure the DHCP server is already set up
and DHCP service running when you initiate server
setup:
- IP address (000.000.000.000). A unique static address.
- DNS servers (000.000.000.000) used to convert IP
addresses to fully qualified DNS names and vice versa for
the port.
- Search domains (optional). Names to automatically
append to Internet addresses when you don’t fully
qualify them. For example, if you specify
campus.univ.edu as a search domain, you can type
server1 in the Finder’s Connect To Server dialog box to
connect to server1.campus.univ.edu.
“Using DHCP” Specify these settings if you want to use a DHCP server
to assign a dynamic IP address and optionally other
settings for the port. Make sure the DHCP server is
already set up and DHCP service running when you
initiate server setup:
- DHCP client ID (optional). A string that’s useful for
recognizing a port when its IP address changes. Don’t
specify a DHCP client ID when using Server Assistant to
set up the server remotely. Instead, after setup, use the
server’s Network preferences to define a DHCP client ID.
- DNS servers (000.000.000.000) used to convert IP
addresses to fully qualified DNS names and vice versa for
the port.
- Search domains (optional). Names to automatically
append to Internet addresses when you don’t fully
qualify them. For example, if you specify
campus.univ.edu as a search domain, you can type
server1 in the Finder’s Connect To Server dialog box to
connect to server1.campus.univ.edu.
“Using BootP” Specify these settings if you want to use a Bootstrap
Protocol server to assign an IP address for the identified
port. With BootP, the same IP address is always assigned
to a particular network interface. It’s used primarily for
computers that start up from a NetBoot image:
- DNS servers (000.000.000.000) used to convert IP
addresses to fully qualified domain names and vice versa
for the port.
- Search domains (optional). Names to automatically
append to Internet addresses when you don’t fully
qualify them. For example, if you specify
campus.univ.edu as a search domain, you can type
server1 in the Finder’s Connect To Server dialog box to
connect to server1.campus.univ.edu.
Item Description Your information