Setup guide

UNCLASSIFIED
UNCLASSIFIED
18
Chapter 3 –
Initial Installation
1. Place the CD with the 10.3.3 Update package in the CD-ROM drive. Mac OS
v.10.3.3 must be loaded before 10.3.4 can be installed.
2. Open the CD and double-click the MacOSXUpdateCombo10.3.3.dmg to
open the disk image containing the update package.
3. Double-click the MacOSXUpdateCombo10.3.3.pkg to start the
installation.
4. Follow the instructions provided by the Installer.
5. When the installation is complete, click Restart to continue, and the system
will reboot.
After the reboot, the system will automatically log into the administrator's account.
Next, use the following procedure to install the first security update to the system:
1. Insert the disk containing SecUpd2004-05-24Pan.dmg.
2. Open the disk and double-click the SecUpd2004-05-24Pan.dmg to open
the disk image containing the first security update.
3. Double-click the security update package SecUpd2004-05-24Pan.pkg to
start the installation.
4. Follow the instructions of the Installer.
5. When the Installer has completed, click Close.
Next, use the following procedure to install the 10.3.4 update to the system:
1. Place the disk with the 10.3.4 Update package in the CD-ROM drive.
2. Open the disk and double-click the MacOSXUpdate10.3.4.dmg to open
the disk image containing the update package.
3. Double-click the MacOSXUpdate10.3.4.pkg to start the installation.
4. Follow the instructions provided by the Installer.
5. When the installation is complete, click Restart to continue, and the system
will reboot.
After the reboot, the system will automatically log into the administrator's account.
Next, use the following procedure to install the second security update to the system:
1. Insert the CD-ROM with the security update.
2. Open the CD and double-click the SecUpd2004-06-07Pan.dmg to open
the disk image containing the security update.
3. Double-click the security update package SecUpd2004-06-07Pan.pkg to
start the installation.