Setup guide

UNCLASSIFIED
UNCLASSIFIED
17
Chapter 3 -
Initial Installation
being updated is loaded with Mac OS X v.10.3.2 or earlier. If any of the listed
updates have already been installed on the system being configured, skip the
instructions for those updates. The updates that need to be downloaded are:
• Mac OS X (10.3.3) Combined Update 10.3.3
• Security Update 2004-05-24 (10.3.3)
• Mac OS X Update 10.3.4
• Security Update 2004-06-07 (10.3.4)
Make sure to note the SHA-1 digest for each of these files. The SHA-1 digest should
be posted on-line with the download.
Once the software updates have been downloaded from Apple they should be
checked for viruses and written to a CD. Apple also provides a SHA-1 digest for their
updates so that the integrity of the update can be verified. The SHA-1 digest should
be checked to confirm the authenticity of the updates. Check the updates using the
following steps:
1. Start the Terminal program, located in /Applications/Utilities.
2. In the Terminal window, issue the following command:
/usr/bin/openssl sha1 <full path filename>
where <full path filename> is the full path filename of the update for
which the SHA-1 digest is being checked. Repeat this for each update.
3. The pathname of the file will be displayed in the Terminal window followed by
the SHA-1 digest for that file.
4. Check the SHA-1 digest for each update against the SHA-1 digest displayed on
the Apple site. The SHA-1 digest will be displayed in the “Information and
Download” document for the update. In most cases, this will be the document
that is displayed when the link for downloading the document is clicked. If
not, search for the name of the update in the downloads section of the Apple
support page, and find the “Information and Downloads” document for the
update to obtain the SHA-1 digest.
5. The SHA-1 digest for each update should match the digest given on Apple’s
web site for that update. If it does not, the file was corrupted in some way and
a new copy should be obtained.
Installing Updates
Updates must be installed in the proper order. Make sure each of the updates are
installed on the system in the order given below. Use the following procedure to
install the 10.3.3 update on the system: