User Guide

Mac mini Upgrades - 23
Modem Upgrade Kit
15. Note: If the airport antenna board contained in the finished goods upgrade kit has too
large a hole (shown below) for the internal frame to clip onto, use additional kapton
tape to secure the antenna to the internal frame. Either place a little kapton tape
beneath the antenna board or place a strip of tape next to and running parallel to the
antenna board, going from the optical drive across to the internal frame, securing the
antenna cable to the internal frame.
16. Secure the power button cable to the internal frame with the kapton tape.
17. Replace the top housing. (For Australian installations, refer to the next step.)