System information
Mac mini (Mid 2011) Take Apart — General Information 96
2011-07-21
Connector Types on Logic Board
The Mac mini (Mid 2011) has small and delicate cable connectors and screws. Use extra care and
nesse to avoid damaging components.
On the logic board are two types of connectors, each requiring special handling. Make sure you
read these tips before disconnecting and installing the connectors.
Vertical Insertion
(JST)
• Important: These
connectors are
extremely fragile. Use
extreme care. Major
repairs may be needed
if damaged.
• Use a black stick under
the cable, next to
the connector, with
a nger over the top
for support, or grasp
cables with tweezers,
and lift straight up to
remove.
• Keep connector
level to board when
disconnecting and
reconnecting.
• When connecting,
verify that the grooves
in the connector, face
down.
• Press evenly when
reconnecting or
connector can be
tipped up and not fully
seated.
Low-Prole Solid
Platform Flex
• Use black stick and
gentle rocking motion
to release tension to
remove cable.
• To install, keep
connector level to
board and press down
evenly.