System information

Mac mini (Mid 2011) Take Apart — Hard Drive (Upper Bay) 145
2011-07-21
3 Remove 4 screws,
located in front and
back of the carrier.
• 923-0017
4 Lift the drive from the
carrier.
Reassembly
Warning: For Solid State
Drives, tighten ONLY
FINGER TIGHT, or screw
boss damage can result.
1 If installing the drive
ex cable, connect
it to the hard drive,
then re-use, or use
the included black
tape, to secure the
connector to the top
of the hard drive.
2 Before installing the
lower bay hard drive
assembly, make sure
the EMI gaskets are in
place and have not
shifted. If dislodged,
do not touch the
adhesive side when
replacing.