Mac mini User’s Guide Includes setup and troubleshooting information for your Mac mini computer
K Apple Computer, Inc. © 2005 Apple Computer, Inc. All rights reserved. Under the copyright laws, this manual may not be copied, in whole or in part, without the written consent of Apple. The Apple logo is a trademark of Apple Computer, Inc., registered in the U.S. and other countries. Use of the “keyboard” Apple logo (Option-Shift-K) for commercial purposes without the prior written consent of Apple may constitute trademark infringement and unfair competition in violation of federal and state laws.
Contents 7 8 14 16 Chapter 1: Getting Started Setting Up Your Mac mini What’s Next? Putting Your Mac mini to Sleep or Shutting It Down 17 18 20 22 23 23 24 25 26 27 29 30 30 Chapter 2: Getting to Know Your Mac mini Basic Features of Your Mac mini Learning About Mac OS X Customizing Your Desktop and Setting Your Preferences Using the Internet Connecting to a Network Getting Answers Using Mac Help Keeping Your Software Up to Date Using Applications Connecting to a Printer Playing a CD and Connecting Headp
33 34 35 37 40 43 47 49 50 54 Chapter 3: Using Your Mac mini Connecting a Display or Video Device Using USB Connecting With FireWire Understanding AirPort Extreme Wireless Networking Using Bluetooth Wireless Technology Connecting With Ethernet (10/100Base-T) Connecting Audio Devices Using Your Optical Drive Securing Your Mac mini 55 56 58 60 63 64 66 Chapter 4: Troubleshooting Problems That Prevent You From Using Your Computer Reinstalling the Software That Came With Your Computer Other Problems Using Ap
70 71 71 72 73 75 Safety Instructions for Setting Up and Using Your Computer Using Connectors and Ports Using the Power Adapter Avoiding Hearing Damage Understanding Ergonomics Learning About Apple and the Environment 77 80 83 83 87 94 98 Appendix C: Connecting to the Internet Using the Setup Assistant Worksheet Setting Up Your Internet Connection Manually Using a Dial-Up Connection Using DSL, Cable Modem, or LAN Internet Connections Configuring an AirPort Extreme Wireless Connection Troubleshooting Your
1 Getting Started 1 Your Mac mini has been designed so that you can easily set it up and start using it right away. If you have never used a Mac mini or are new to Macintosh computers, read this section for instructions about getting started. If you are an experienced user, you may already know enough to get started. Be sure to look over the information in Chapter 2, “Getting to Know Your Mac mini,” to find out about the features of your Mac mini.
Setting Up Your Mac mini Follow these steps to set up your Mac mini. If there is any protective film around the computer or power adapter, remove it before setting up your Mac mini. 1 Plug the AC cord firmly in to the power adapter. Plug the cord from the power adapter in to the computer. Plug the power adapter in to a grounded power outlet.
2 To access the Internet, connect an Ethernet cable or phone cord. Note: Not all Mac mini models include a modem. If you would like to use a modem with your Mac mini, you can have one installed by an Apple Authorized Service Provider or at an Apple Store retail location.
3 Connect the USB cable from your keyboard and mouse. Your Mac mini does not come with a keyboard and mouse, but you can use almost any USB keyboard or mouse with your computer. If your keyboard has a USB port, you can plug your mouse in to the USB port on the keyboard. If it doesn’t, you can plug the mouse in to a USB port on the back of the computer.
If you use a USB keyboard that is not specifically designed for the Mac OS, it may not have a Command (x) or Option key, both of which are standard on Apple keyboards. The Command (x) key on an Apple keyboard is equivalent to the Windows key (the icon on the key looks like a Windows logo) on a keyboard from another manufacturer. The Option key on an Apple keyboard is equivalent to the Alt key on a keyboard from another manufacturer.
4 Connect the DVI cable from your display to the video port. To connect a VGA display, use the Apple DVI to VGA Adapter that came with your computer. For more information about connecting a display, see the guidelines in Chapter 2, “Getting to Know Your Mac mini.” Important: Don’t place anything on top of your Mac mini. Objects placed on top may interfere with the optical drive or with the AirPort or Bluetooth® wireless signal, if you have the optional AirPort Extreme or Bluetooth technology installed.
5 Press the power button (®) on the back of your Mac mini to turn it on.
What’s Next? You’ve done everything you need to get your Mac mini up and running. The first time you turn on your computer, Setup Assistant starts and helps you enter your Internet and email information and set up a user on your computer. If you already have a Mac, Setup Assistant can help you automatically transfer files, applications, and other information from your previous Mac to your new Mac mini.
You may want to deauthorize your old Mac to prevent your iTunes Music Store songs or spoken word purchases from being played or to change which computers are authorized to play your purchases. For more information, choose Help > Mac Help, then choose Library > “iTunes and Music Store Help,” and search for “deauthorize.” If you don’t use Setup Assistant to transfer information when you first start up your Mac mini, you can do it later using Migration Assistant.
Putting Your Mac mini to Sleep or Shutting It Down When you have finished working with your Mac mini, you can put your computer to sleep or shut it down. Put Your Mac mini to Sleep to Save Energy If you will be away from your Mac mini for less than a few days, put the computer to sleep. When the computer is in sleep, its screen is dark. You can quickly wake the computer and bypass the startup process. To put the computer to sleep, do one of the following: Â Choose Apple () > Sleep.
2 Getting to Know Your Mac mini 2 This chapter gives you some basic information you’ll need to know about your Mac mini. Read on for an overview of the different parts of your computer and Mac OS X, and summary information about common tasks such as customizing the way your desktop looks, connecting to a printer, playing a CD, connecting a digital camera, using the Internet, getting answers when you need help, and more.
Basic Features of Your Mac mini Slot-loading optical drive Power indicator light ® Power button Security slot Power port Headphone port FireWire port Video out port Ethernet port (10/100Base-T) Modem port (optional) USB ports (2) Note: Not all Mac mini models include a modem.
Slot-loading optical disc drive Your Mac mini has a Combo drive or a SuperDrive. Each drive can read CD-ROM discs, photo CDs, and standard audio discs. The Combo drive can read DVD discs and movies and write music, documents, and other digital files to CD-R and CD-RW discs. In addition to those files, the SuperDrive can also read and write to DVD±R and DVD±RW discs. Power indicator light A white light indicates your Mac mini is on; a pulsing light indicates it’s in sleep.
Learning About Mac OS X Your computer comes with Tiger, the latest version of Mac OS X, which includes Spotlight, an improved search engine that automatically indexes all of your files; Dashboard, an interface for putting handy “widgets” or mini-applications at your fingertips; Exposé, which tiles and neatly displays all your open applications; and much more.
When you’re ready to learn more about Mac OS X and the award-winning iLife applications that came with your computer, see the Welcome to Tiger booklet that came with your computer. You’ll find plenty of information for new users, experienced users, and those switching to the Mac. If you experience any problems while using Mac OS X, see the troubleshooting tips in the back of this book or choose Help > Mac Help from the menu bar at the top of the screen.
Customizing Your Desktop and Setting Your Preferences You can quickly make your desktop look the way you want using System Preferences. Choose Apple () > System Preferences from the menu bar. Feel free to make changes and experiment with the following: Â Desktop & Screen Saver: Select this preference pane to change the background color or pattern of your desktop, or change it to a photo or image you like.
 Dock: Select this preference pane to change the look, location, and behavior of your Dock.  Appearance: Select this preference pane to change the colors of buttons, menus, windows, and highlight colors, among other options. As you get to know your computer, explore the other system preferences. System Preferences is your command center for most settings on your Mac mini. For more information, open Mac Help and search for “System Preferences” or for the specific preference you want to change.
Getting Answers Using Mac Help You can find answers to most of your questions about using your computer and Mac OS X in Mac Help. To use Mac Help: 1 Click the Finder icon in the Dock. 2 Choose Help > Mac Help from the menu bar. 3 Type a question and press the Return key on your keyboard. 4 Double-click an item in the list of help topics.
Keeping Your Software Up to Date You can connect to the Internet and automatically download and install the latest free software versions, drivers, and other enhancements from Apple. When you are connected to the Internet, Software Update checks Apple’s servers to see if any updates are available for your computer. You can set your Mac mini to check the Apple server periodically and download and install updated software. To check for updated software: 1 Choose Apple () > Software Update.
Using Applications Your Mac mini comes with software applications, including the iLife suite of applications, for doing things like sending email, surfing the Internet, chatting online, organizing music and digital photos, making movies, and much more. For more information about these applications, see the Welcome to Tiger booklet that came with your computer. For more information about a particular application, open the application, then open the help for the application.
2 Click Force Quit. The application quits, leaving all other applications open. If you need to, you can force the Classic environment to quit, which closes all Classic applications. You can also restart the Finder from this dialog. If you experience other problems, see Chapter 4, “Troubleshooting,” on page 55. Connecting to a Printer When you connect a USB or FireWire printer, your computer can usually detect it and then adds it to the list of available printers.
To set up a printer: 1 Choose Apple () > System Preferences and click the Print & Fax icon. 2 Click Printing and click the Add (+) button to add a printer. 3 Select the printer you want to add, and then click Add. 4 Use the Add (+) and Remove (–) buttons to choose the printers that appear in the printer list. Note: If you’re connecting to a printer via a network, you may need to know the network name or address of the printer to select it. Ask your network administrator.
Monitoring Printing After you send a printing job to a printer, you can monitor, stop, or put it temporarily on hold. To monitor printing, click the printer icon in the Dock to open the printer window. You can see the print jobs in the print queue and work with them. More Information For more information, open Mac Help and search for “printing.” You can also refer to the manual that came with your printer for specific installation and setup directions.
Connecting a Camera or Other FireWire Device If you have an iPod, iSight camera, FireWire digital video camera, hard drive, or other device that has a FireWire connector, you can connect it to your Mac mini. Follow the installation instructions that came with your device. For more information about FireWire, see “Connecting With FireWire” on page 37.
 If your computer has AirPort Extreme technology, you can connect to an AirPort wireless network to transfer files. For more information, see “Understanding AirPort Extreme Wireless Networking” on page 40.  If you use devices that have Bluetooth wireless technology, your Mac mini can communicate with them. See “Using Bluetooth Wireless Technology” on page 43.  If you have an iPod or iPod mini digital music player, you can transfer files to it, then connect your iPod to the other computer.
3 Using Your Mac mini 3 Your Mac mini has many built-in features you can use to customize your computer to fit your needs. Here are some of your computer’s features and capabilities: Â High-speed USB 2.0 ports for connecting additional equipment, such as an iPod shuffle digital music player, printers, scanners, keyboards, digital cameras, disk drives, and more. See “Using USB” on page 35. Â FireWire port for connecting high-speed equipment, such as digital video cameras or external hard disks.
To learn about what you can do with your Mac mini, start with the information in this chapter. You can find additional information in Mac Help and on the Apple Mac mini website at www.apple.com/support/macmini. Connecting a Display or Video Device You can connect displays with a DVI connector to your Mac mini. Using one of the adapters described below, you can also connect displays with a VGA connector or you can connect a video device.
DVI to Video Adapter You can also connect a television, VCR, or other external video device to your computer with the Apple DVI to Video Adapter, which is available from an Apple Authorized Reseller, an Apple Store retail location, or the online Apple Store at www.apple.com/ store. For information about compatibility with third-party displays, see the documentation that came with the display or contact the display’s manufacturer.
Using USB Devices To use a USB device, simply connect the device to the computer. Your computer automatically accesses the necessary software whenever you connect a new device. You can connect USB 1.1 devices and high-speed USB 2.0 devices to the USB 2.0 ports on the back of your computer. USB 1.1 devices won’t take advantage of the USB 2.0 higher transfer rate. Note: Apple has already included software to work with many USB devices.
For More Information About USB Additional information about USB is available in Mac Help. Choose Help > Mac Help and search for “USB.” You can also find information on the Apple USB website at www.apple.com/usb. For information about USB devices available for your computer, check the Macintosh Products Guide at www.apple.com/guide.
 Connect an Apple iSight camera and use the included iChat AV application to videoconference with friends and family over a high-speed Internet connection.  Connect a digital video camera to capture, transfer, or edit high-quality video directly on your computer using video-editing software such as iMovie or Final Cut Express.  Connect an external FireWire hard disk and use it to back up data or transfer files.  Start up from an external FireWire hard disk.
FireWire Target Disk Mode If you want to transfer files between your Mac mini and another FireWire-equipped computer, or you have a problem that prevents your computer from starting up, you can use FireWire Target Disk Mode to connect to another computer. To connect your Mac mini in FireWire Target Disk Mode, follow these steps: 1 Make sure that your Mac mini is shut down. 2 Use a FireWire cable to connect your Mac mini to another FireWire-equipped computer.
Understanding AirPort Extreme Wireless Networking Some Mac mini models include AirPort Extreme. If you ordered AirPort Extreme technology (also called WiFi or 802.11b/g) when you purchased your Mac mini, it is already installed. AirPort offers an easy and affordable way to provide wireless Internet access anywhere in the home, at work, or in the classroom. AirPort uses wireless local area network (LAN) technology to provide wireless communication between multiple computers.
How AirPort Provides Wireless Internet Access With AirPort, you set up a wireless connection to a device known as a base station, which has a physical connection to the Internet. AirPort technology works like a cordless telephone. The AirPort Extreme Card in the computer makes a wireless connection to the base station, which is connected to the Internet via a telephone line or a DSL or cable modem.
AirPort Express and AirPort Extreme Base Station Use an AirPort Express to play iTunes music over your wireless network to your home stereo or powered speakers. With an AirPort Extreme Base Station or AirPort Express, you can also share a broadband Internet connection for up to 10 users and a USB printer. (Wireless printing over USB requires a compatible printer.) Important: To ensure you have an adequate AirPort signal, don’t place anything on top of your Mac mini.
Using Bluetooth Wireless Technology If you ordered Bluetooth technology when you purchased your Mac mini, it’s already installed. With Bluetooth technology, your Mac mini can connect to other devices that use Bluetooth wireless technology, such as mobile phones, PDAs, printers, and the Apple Wireless Keyboard and Mouse (available for purchase at an Apple Authorized Reseller, an Apple Store retail location, or from the online Apple Store at www.apple.com/store).
Important: To ensure you have an adequate Bluetooth signal, don’t place anything on top of your Mac mini. Objects placed on top of the computer can cause interference. Setting Up a Bluetooth Device Before you can use a Bluetooth enabled device with your Mac mini, you need to set up the device to work with your computer. After you set up the device, it is “paired” with your computer, and you can see it in the Devices pane of Bluetooth preferences.
Setting Up Bluetooth File Exchange You can control how your computer handles files that are exchanged between Bluetooth devices. You can choose:  To accept or refuse files sent to your computer  Which folder to use for the files you accept from other devices  Which folder other devices can browse  Which applications to use with the files you accept To set up Bluetooth File Exchange: 1 Open System Preferences and click Bluetooth. 2 Click Sharing.
Sending a File to a Bluetooth Device Your computer can send files to other Bluetooth devices in range of your computer. If your computer is not paired with the device, you may have to authenticate with it before you can send the file. If you have already paired your computer with the device, you should not have to authenticate with it again. To send a file to a Bluetooth device: 1 Choose Bluetooth status menu (◊) > Send File. 2 Select the file you want to send, then click Send.
Connecting With Ethernet (10/100Base-T) Your computer comes with built-in 10/100 megabit per second (Mbps) Base-T (twistedpair) Ethernet networking capability, which you can use to connect to a network or to a cable or DSL modem. Ethernet port (10/100Base-T) Connecting to a network gives you access to other computers. You may be able to store and retrieve information; use network printers, modems, and send email; or connect to the Internet.
The Ethernet port on your Mac mini automatically detects other Ethernet devices. You don’t need a crossover cable to connect to other Ethernet devices. Â Use 2-pair category 3 (Cat 3) Ethernet cables to connect to a 10Base-T Ethernet network. Â Use 4-pair category 5 (Cat 5) Ethernet cables to connect to a 10Base-T or a 100Base-T Ethernet network.
Connecting Audio Devices Your Mac mini comes with a headphone port (f ) so that you can connect headphones and listen to music without disturbing anyone around you. You can also add powered speakers or stream music to your home stereo with iTunes and an AirPort Express. Headphone port You can also connect your Mac mini to your stereo system. Use a 3.5-millimeter miniplug-to-RCA cable (not included) to connect the headphone port (f ) on your Mac mini to the audio input ports on your stereo.
Using Your Optical Drive You can install or use software from CDs and DVDs using your optical drive. You can play music from audio CDs and play DVD movies. You can also burn music CDs that can play in most CD players, and you can save documents and other digital files on CD-R and CD-RW discs.
Inserting a CD or DVD Disc To install or use programs from a CD or DVD disc, follow these steps: 1 Place the disc into the optical drive with the label side up. 2 When the icon for the disc appears on the desktop, the disc is ready to use. Note: Some DVD discs are two-sided and don’t have a label on either side. Ejecting a Disc To eject a disc, drag the disc icon to the Trash. If you can’t eject the disc, quit any applications that may be using the disc and try again.
Playing DVD Discs To play a DVD, insert the DVD disc. DVD Player opens automatically and starts playing the disc. Recording CD-R and CD-RW Discs You can record music on CD-R or CD-RW discs right from your iTunes library. To burn music to a CD-R or CD-RW disc using iTunes: 1 Click the iTunes icon in the Dock. 2 Select the playlist you want to record. 3 Insert a blank CD-R or CD-RW disc. (For highest compatibility with CD players, use a CD-R disc.) 4 At the top of the iTunes window, click Burn CD.
Recording Information on a DVD If your Mac mini has a SuperDrive, you can record your own home movies on a blank DVD±R or DVD±RW disc. You can also record other kinds of digital data (for example, you can back up your files). To record data to a DVD-R disc using the Finder: 1 Insert a blank DVD±R or DVD±RW disc in the drive. 2 In the dialog that appears, enter a name for the disc and select the format you want to create. An icon for the DVD appears on the desktop.
Securing Your Mac mini You can use a locking cable (available at www.apple.com/store) and the built-in security slot to attach your Mac mini to a stationary object. Security slot Additional information about the software security features of your Mac mini, including multiple user passwords and file encryption, is available in Mac Help. Choose Help > Mac Help and search for “security” or “multiple users.
4 Troubleshooting 4 If you have any difficulties while working with your Mac mini, try the solutions in this chapter. This chapter contains solutions to problems that prevent you from working with your computer, such as a system freeze or a computer that will not start up. You can find more troubleshooting information in Mac Help or on the Apple Service & Support website at www.apple.com/support. When you experience a problem with your computer, there is usually a simple and quick solution.
Problems That Prevent You From Using Your Computer If the computer won’t respond or the pointer won’t move  First, make sure the mouse and keyboard are connected. Unplug and then plug in the connectors and make sure they are secure.  If that doesn’t work, try to force problem applications to quit. Hold down the Option and Command (x) keys and then press the Esc key. If a dialog appears, select the frozen application and click Force Quit.
If the computer freezes during startup or you see a flashing question mark  Wait a few seconds. If the computer doesn’t start up after a delay, shut down your computer by pressing and holding the power button (®) for about 5 seconds, until the computer shuts down. Then hold down the Option key and press the power button (®) again to start up your computer. When your computer starts up, click the hard disk icon, then click the right arrow.
Reinstalling the Software That Came With Your Computer Use the software installation discs that came with your computer to reinstall Mac OS X and the applications that came with your computer, and to install Mac OS 9 (if you want to use Mac OS 9 applications with your computer). Important: Apple recommends that you back up the data on your hard disk before restoring software. Apple is not responsible for any lost data. Installing Mac OS X To install Mac OS X: 1 Back up your important files, if possible.
Installing Applications Your computer must have Mac OS X already installed before you can install the applications that came with your computer. To install the applications that came with your computer: 1 Back up your important files, if possible. 2 Insert the Mac OS X Install Disc 1 that came with your computer. 3 Double-click Install Bundled Software Only. 4 Follow the onscreen instructions. 5 Select the destination disk for installation and continue following the onscreen instructions.
Other Problems If you have a problem with an application For problems with software from a manufacturer other than Apple, contact the manufacturer. Software manufacturers often provide updates to their software on their websites. You can set your Mac mini to check for and install the latest Apple software automatically using the Software Update pane of System Preferences. For more information, choose Help > Mac Help and search for “software update.
 For more information about using and troubleshooting AirPort, choose Help > Mac Help, then choose Library > AirPort Help. If you have trouble ejecting a disc  Quit any applications that may be using the disc and press the Media Eject (C) key on your Apple Keyboard. On other keyboards, you may be able to use a key combination to eject discs. Check the documentation that came with your keyboard.
If you have a problem using your computer or working with the Mac OS  If the answers to your questions are not in this manual, look in Mac Help for instructions and troubleshooting information. Choose Help > Mac Help.  Check the Apple Service & Support website at www.apple.com/support for the latest troubleshooting information and software updates. If your date and time settings get lost repeatedly  You may need to have the internal backup battery replaced.
Using Apple Hardware Test You can use Apple Hardware Test to help determine if there is a problem with your computer’s hardware. To use Apple Hardware Test: 1 Disconnect all external devices from your computer except the display, keyboard, and mouse. If you have an Ethernet cable connected, disconnect it. 2 Insert the Mac OS X Install Disc 1 that came with your computer. 3 Restart your computer and hold down the Option key as it starts up. A list of available startup volumes appears.
Learning More, Service, and Support Your Mac mini does not have any user-accessible parts. If you need service, take your Mac mini to an Apple Authorized Service Provider or contact Apple for service. You can find more information about your Mac mini through online resources, onscreen help, System Profiler, or Apple Hardware Test.
AppleCare Service and Support Information Your Mac mini comes with 90 days of technical support and one year of hardware repair warranty coverage at an Apple-authorized repair center such as Apple Authorized Service Provider (AASP) or an Apple Store retail location. You can extend your coverage by purchasing the AppleCare Protection Plan. For more information, visit www.apple.com/support/complimentary or visit the website address for your country listed below.
Locating Your Product Serial Number You can find the serial number on the bottom of your Mac mini. You can also use System Profiler to find the serial number. Choose Apple () > About This Mac from the menu bar and then click More Info. Click the Hardware triangle to view the serial number.
Specifications A Appendix A You can use System Profiler to find out detailed information about your Mac mini, such as the amount of built-in memory, hard disk size, devices connected, and the product serial number. To access the information in System Profiler, choose Apple () > About This Mac from the menu bar and then click More Info.
Click the triangles in the window to show and hide information in the different categories. Additional information is available on the Internet at www.apple.com and www.apple.com/support.
Care, Use, and Safety Information B Appendix B For your safety and the safety of your equipment, follow the rules in this appendix for cleaning and handling your computer, as well as the guidelines for working more comfortably. Cleaning Your Mac mini Follow these general rules when cleaning the outside of your computer and its components: Â Shut down your Mac mini and disconnect all cables. Â Use a damp, soft, lint-free cloth to clean the computer’s exterior. Avoid getting moisture in any openings.
Safety Instructions for Setting Up and Using Your Computer For your own safety and that of your equipment, always take the following precautions.
 Read all the installation instructions carefully before you plug your computer in to a wall socket.  Keep these instructions handy for reference by you and others.  Follow all instructions and warnings dealing with your system. Important: Electrical equipment may be hazardous if misused. Operation of this product, or similar products, must always be supervised by an adult. Do not allow children access to the interior of any electrical product and do not permit them to handle any cables.
 The only way to disconnect power completely is to unplug the power cord. Make sure you pull the plug, not the cord. Important: The power adapter for your computer is a high-voltage component and should not be opened for any reason, even when it’s unplugged. Do not allow children access to the interior of any electrical product and do not permit them to handle any cables. If the power adapter needs service, see “Learning More, Service, and Support” on page 64.
Understanding Ergonomics Chair An adjustable chair that provides firm, comfortable support is best. Adjust the height of the chair so your thighs are horizontal and your feet flat on the floor. The back of the chair should support your lower back (lumbar region). Follow the manufacturer’s instructions for adjusting the backrest to fit your body properly.
Mouse Position the mouse at the same height as your keyboard and within a comfortable reach. Shoulders relaxed 45–70 cm (18–28 in.) Forearms and hands in a straight line Top of the screen at or slightly below eye level (You may need to adjust the height of your display by raising or lowering your work surface.
Change hand positions often to avoid fatigue. Some computer users may develop discomfort in their hands, wrists, or arms after intensive work without breaks. If you begin to develop chronic pain or discomfort in your hands, wrists, or arms, consult a qualified health specialist. For More Information Go to www.apple.com/about/ergonomics. Learning About Apple and the Environment Apple Computer, Inc., recognizes its responsibility to minimize the environmental impacts of its operations and products.
Connecting to the Internet C Appendix C You can use your computer to browse the World Wide Web, send email to friends and family, and chat in real time over the Internet. Use this detailed guide to connect to the Internet. When you first start up Mac OS X, Setup Assistant helps you enter your Internet configuration information. If you didn’t use Setup Assistant to configure your Internet connection, you can use it now. Open System Preferences and click Network.
 Local area network (LAN): Your computer is plugged in to a LAN using an Ethernet cable. This type of connection is usually used in the workplace. Before you connect to the Internet: 1 Set up an account with an ISP. If you do not have an ISP account, you can find an ISP in your phone directory. Look under “Internet access,” “Internet service,” or “online.” Note: If you want to use America Online as your ISP, skip the Internet setup part of Setup Assistant.
To find the settings on a Windows PC: The connection information on a Windows computer resides in two places. Â To find the IP address and subnet mask, open the “Network and Internet Connections” control panel. Â To find user account information, open the User Accounts control panel. You can write the information directly on the next few pages, then enter it in Setup Assistant. 1 If you are using a dial-up modem, plug a phone cord in to your computer’s modem port and in to a phone wall jack.
Using the Setup Assistant Worksheet You can write the information you get from your Internet service provider (ISP), your network administrator, or your other computer on these pages, then enter it in Network Setup Assistant. Select how your computer connects to the Internet.
To set up a DSL or cable modem or a LAN connection: 1 Choose your connection type. Ask your ISP for this information. Manually Manually using DHCP Router Using DHCP Using BootP PPP 2 Enter information from your ISP: If you selected “Manually” or “Manually using DHCP Router,”1 enter the following: IP Address Subnet Mask Router Address If you selected “Using DHCP,” enter the following: DHCP Client ID 1.
Note: DHCP Client ID is optional and may not be required. Ask your ISP. If you selected “PPP (for PPPoE connections),” enter the following: Service Provider (optional) PPPoE Service Name (optional) Account Name Password The information below is optional. Ask your ISP if you need to enter it.
Setting Up Your Internet Connection Manually Once you have completed the steps on the previous pages using Setup Assistant, you are done setting up your Internet connection. If you don’t want to use Setup Assistant, or if you only want to make changes to specific parts of your Internet setup configuration, you can use the instructions below to set up your connection manually. To enter your information manually, follow the steps that correspond to your connection method.
3 Choose Network Port Configurations from the Show pop-up menu and select the On checkbox next to Internal Modem. 4 Drag Internal Modem to the top of the Port Configurations list to make it the preferred, or primary, network interface. 5 Choose Internal Modem from the Show pop-up menu and click PPP.
6 Enter the information from your ISP and click Apply Now. To test your Internet configuration: 1 Open the Internet Connect application (in the Applications folder). 2 Click the Internal Modem icon, if it’s not already selected. 3 Enter your dial-up telephone number, account name, and password, if necessary. 4 Click Connect. Internet Connect dials your ISP and establishes a connection.
To connect automatically when you start an Internet application, such as a web browser or email: 1 Click PPP Options (in the PPP pane of Network preferences). 2 Select the “Connect automatically when needed” checkbox. 3 Click OK and Apply Now.
Using DSL, Cable Modem, or LAN Internet Connections If you connect to the Internet using a DSL or cable modem or Ethernet LAN, ask your ISP or network administrator how you should configure your Internet connection. Â Manually: With a manual configuration, your ISP or network administrator provides a static IP address and other information that you enter in Network preferences.
4 Select the On checkbox next to Built-in Ethernet. 5 Drag Built-in Ethernet to the top of the Port Configurations list to make it the preferred, or primary, network interface. Next, follow the instructions to configure your network manually, using DHCP, or using PPPoE, as instructed by your ISP or network administrator. Manual Configuration Have your static IP address, router address, and subnet mask from your ISP ready (see page 80).
To set up a manual configuration: 1 In Network preferences, choose Built-in Ethernet from the Show pop-up menu. 2 Click TCP/IP, if it’s not already selected. 3 Choose Manually from the Configure IPv4 pop-up menu. 4 Type the other information in to the corresponding fields. 5 Click Apply Now. Once you configure your network, your connection is ready. Open your web browser (or another TCP/IP application) to test your Internet connection.
DHCP Configuration After you set up a DHCP configuration, the DHCP server automatically provides your network information. To set up a DHCP configuration: 1 In Network preferences, choose Built-in Ethernet from the Show pop-up menu. 2 Click TCP/IP, if it’s not already selected. 3 Choose Using DHCP from the Configure IPv4 pop-up menu.
4 Click Apply Now. Open your web browser (or another TCP/IP application) to test your Internet connection. Note: Unless your ISP instructs you to do otherwise, ignore the DHCP Client ID field and the Search Domains field. PPPoE Configuration Some DSL-based ISPs use Point-to-Point Protocol over Ethernet (PPPoE). If you use a DSL modem and need a user name and password to connect to the Internet, check with your ISP to determine if you should connect using PPPoE.
2 Click PPPoE and select “Connect using PPPoE.” 3 Type the information in to the corresponding fields. If you want all users of your computer to use the same connection method, select “Save password.” Note: To connect automatically when you start a TCP/IP application, such as a web browser or email, click PPPoE Options, then select “Connect automatically when needed.
4 Click TCP/IP and choose either Using PPP or Manually from the Configure IPv4 pop-up menu, as instructed by your ISP. If you have a static IP address from your ISP, choose Manually and type the address in the IP Address field. 5 Type the domain name server (DNS) addresses in the DNS Servers field. 6 Click Apply Now. Once you configure your network, your Internet connection is ready. You can open your web browser or other TCP/IP application to test your connection.
Important: If you did not select the option to connect automatically, you will need to open the Internet Connect application, choose the correct configuration, and then click Connect. For more information, choose Help > Internet Connect Help from the menu bar at the top of the display.
If you don’t see an AirPort network listed, you can use the AirPort Setup Assistant to check or change your settings, or you can change them using the Network pane of System Preferences. Setting Up an AirPort Extreme Connection Manually Gather the following information from your system administrator if you’ll be setting up a manual connection.
4 Select the On checkbox next to AirPort. Next, follow the instructions to configure your network either manually or using DHCP, as instructed by your ISP or network administrator. If you’re setting up your network yourself, it may be easier to configure the network using DHCP, because the server assigns IP addresses automatically.
1 Choose AirPort from the Show pop-up menu. 2 Click TCP/IP, if it’s not already selected. 3 In the Configure IPv4 pop-up menu, choose either Manually or Using DHCP. Â If you chose Manually, type the other information into the corresponding fields. Â If you chose Using DHCP, you don’t need to enter any further information unless your system administrator has instructed you to do so.
4 Click AirPort and select options for joining an AirPort Extreme network after restarting or when your computer wakes from sleep. 5 Click Apply Now. As soon as you configure your AirPort settings, you are ready to connect. To test your AirPort Extreme connection: m Click the AirPort status icon in the menu bar and choose Turn AirPort On. Any AirPort Extreme network in range should appear in the menu.
PPPoE Connections If you are unable to connect to your Internet service provider using PPPoE, first check the cables and power supplies, then turn the power off and on and reset the modem hardware. Check System Preferences settings: 1 Choose Apple () > System Preferences. 2 Click Network. 3 Choose Network Port Configurations from the Show pop-up menu. 4 Drag Built-in Ethernet to the top of the Port Configurations list. 5 Choose Built-in Ethernet from the Show pop-up menu. 6 Click PPPoE.
Network Connections If you have two or more computers attempting to share an Internet connection, make sure that your network is set up properly. You need to know if your ISP provides only one IP address or if it provides multiple IP addresses, one for each computer. If only one IP address is used, then you must have a router capable of sharing the connection, also known as network address translation (NAT) or “IP masquerading.
Communications Regulation Information FCC Compliance Statement This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. See instructions if interference to radio or television reception is suspected.
Bluetooth Information Laser Information FCC Bluetooth Wireless Compliance The antenna used with this transmitter must not be colocated or operated in conjunction with any other antenna or transmitter subject to the conditions of the FCC Grant. Warning: Making adjustments or performing procedures other than those specified in your equipment’s manual may result in hazardous radiation exposure.
High-Risk Activities Warning This computer system is not intended for use in the operation of nuclear facilities, aircraft navigation or communications systems, or air traffic control machines, or for any other uses where the failure of the computer system could lead to death, personal injury, or severe environmental damage. Deutschland: Dieses Gerät enthält Batterien. Bitte nicht in den Hausmüll werfen.
 Telephone jack type: USOC, RJ-11 An FCC-compliant telephone cord and modular plug are provided with this equipment. This equipment is designed to be connected to the telephone network or premises wiring using a compatible modular jack that complies with Part 68 rules. See the installation instructions for details. Telephone Line Problems If your telephone doesn’t work, there may be a problem with your telephone line. Disconnect the modem to see if the problem goes away.
In Canada, contact Apple at: 7495 Birchmount Road, Markham, Ontario, L3R 5G2, 800-263-3394 Warning: Users should ensure for their own protection that the electrical ground connections of the power utility, telephone lines, and internal metallic water pipe system, if present, are connected together. This precaution may be particularly important in rural areas. Users should not attempt to make such connections themselves, but should contact the appropriate electric inspection authority or electrician.
Service à la clientèle d’Apple Canada: 800-263-3394 Avertissement : Pour sa propre protection, l’utilisateur doit s’assurer que tout les fils de mise à la terre du secteur, des lignes téléphoniques et les canalisations d’eau métalliques, s’il y en a, soient raccordés ensemble. Cette précaution est particulièrement importante dans les régions rurales.
For calls that are automatically generated, a total of three call attempts are allowed to a telephone number, with a minimum period between calls of 2 seconds. If the call does not connect after three attempts, 30 minutes must expire before automatic redialing may be initiated. Failure to set the modem (and any associated communications software) to the above settings may result in the modem being non-compliant with Australian telecommunications standards.
Index Index A B adapters 35 DVI to VGA Adapter 12, 19 DVI to Video Adapter 35 video 34 AirPort AirPort Express 42 connection 83 problems using 60 setting up 94 wireless networking 40 analog audio 49 applications force quit 26 freezing 26 installing 59 quitting 26 troubleshooting 60 using 26 assistants Migration Assistant 15, 30 Setup Assistant 14, 30, 77, 79 audio 49 basic features 18 Bluetooth Bluetooth File Exchange 45 delete a pairing 44 external USB adapter 43 keyboard 43 mobile phones 43 mouse 43
DHCP 83 configuration 90 dial-up connection 77, 83 modem 83 digital video camera 38 display adapters 34 connecting 34 setting up 12 Dock 23 downloading software 25 DSL 83, 87 DVD ejecting 51 inserting 51 playing 52 recording 53 DVI to VGA Adapter 12, 34 DVI to Video Adapter 35 Dynamic Host Configuration Protocol (DHCP) 87 E ejecting a disc 61 Energy Saver 16 environment 75 ergonomics 73 chair 73 display 73 keyboard 74 mouse 74 110 Index Ethernet 47 networking 47 port 19 Exposé 20 F FireWire connecting d
dial-up connection 77, 79, 83 DSL 19, 23, 41, 47, 77 internal 19, 33, 83, 103 port 19 modem cable 23 monitoring a printer 27 mouse connecting 10 ergonomics 74 USB 11 wireless 11, 43 moving your computer 69 N Network 79 network connections 100 Network Setup Assistant 77 O online resources 64 operating system 20 optical disc drive 50 P Point-to-Point Protocol 83, 87, 91 ports analog audio 49 audio input 49 Ethernet 19, 30, 48 Index FireWire 400 19, 37 headphone 19, 29, 49 modem 19, 61, 79 power 19 safety
Network 77, 87 Print & Fax 28 Security 15 Software Update 60 Startup Disk 57 using 22 System Profiler 67 T testing your Internet configuration 85 transferring files or documents 30 information to your Mac mini 14 troubleshooting 55 AirPort connection 60 AppleCare 65 112 Index computer won’t turn on 57 date and time settings 62 ejecting a disc 61 Internet connection 61 reinstalling Mac OS X 58 service and support 64 using Apple Hardware Test 63 using Mac Help 64 turning on your computer 13 U updating so
