Instruction manual

1
63
Io HD Installation and Operation Manual — Easy Setups for Typical Uses
Click on the Easy Setups menu item and Final Cut Pro will present the Easy Setup
dialog window:
Easy Setup Dialog
In the Easy Setup dialog, the Format, Rate and the currently selected Easy Setup in
the Use pulldown is shown. This selection can be changed by clicking on the
pulldown arrow at the right. Doing so results in a list of the factory Easy Setups
available for the format you’ve selected at top. If you do not see all of the Easy Setups
you are expecting, factory and user-defined, then ensure that the Format and Rate
selections are not set specifically, but to “all”. Conversely, if you only want to see one
format, such as HD, and one frame rate, say 29.97fps, then make these selections in
the two pulldowns and the list of Easy Setups for the Use pulldown will be limited to
these parameters. To choose a new Easy Setup from the list, click on the pulldown
menu and select a desired choice. The choice won’t take effect until you click the Setup
button, but you will be able to see the description for the choice just by selecting it
(without clicking the Setup button).
Easy Setups For Use With Io HD
The factory default Easy Setups currently shipped with Io HD are shown below and
may not be inclusive. AJA attempts to add to this list regularly when new formats
which Io HD may playback become available. In addition to this, there are additional
easy setups available on your Io HD Software CD and on the AJA website. Your list
may differ as AJA is continually improving and adding functionality.