Instruction manual

1
47
Io HD Installation and Operation Manual — Using The AJA Control Panel
Analog Out Tab Screen Settings
Analog Format—choices in the Analog Format pulldown menu vary depending upon
the Analog Output video standard. The composite or Y/C is only available when
an SD (525i29.97 or 625i25) format is in use or downconversion from HD has
been selected.
Analog formats can include:
Component (SMPTE/EBU N10)
Component (Beta)
Component (RGB)
Component (RGB -HV)
Monitor Audio—here you can select which two channels will be mapped to the
unbalanced analog audio outputs (the two RCA connectors).
HDMI Tab Screen The Io HD’s HDMI input and output are shown and configured at this tab screen.
The HDMI input pane shows if an HDMI input source has been detected and locked
on, showing the format found.
AJA Control Panel, HDMI Tab