Instruction manual

Digital Out Tab Screen Settings

Separate information panes will be listed (as applicable) for SDI Outputs 1 and 2.

Information that can appear includes the following items. You can view the current

setting or click on another to change to it:

Primary—when selected, this indicates that the SDI output is set to the same

format as the framebuffer. That value will be listed in blue.

Secondary—when selected, this indicates that the SDI output is set to a format

different from the framebuffer (Primary Format). That secondary format value

will be listed in green. This shows that active processing of the video is taking

place (format change and possibly even up/down/cross-conversion).

Analog Out Tab

Screen

Io HD provides a high-quality analog component or composite + Y/C output,

generally used for monitoring. This screen shows the current settings for that analog

output, and allows you to re-conﬁgure it when desired (format). Radio buttons

allow you to select primary or secondary format—which could enable up/down/

cross-conversion.

Note: Composite and Y/C (S-Video) are only able to support SD signals, not HD.

AJA Control Panel, Analog Out Tab