Instruction manual

40
Input Tab Screen
AJA Control Panel, Inputs Tab
On the Inputs screen you can view the currently selected video and audio input
sources and map audio sources to the channels supported by Final Cut Pro (more
on this later). Two information panes in the screen are provided: Video Input and
Audio Input.
Input Tab Screen Settings
Video Input—these radio buttons allow you to see and change what's currently
selected and the video format that Io HD has detected (if any). In the example
shown previously, it shows that video is selected at the SDI 1 input and the
format is 1080i with a frame rate of 29.97. Since this text is shown in blue, you
can tell that it does match the framebuffer's primary format you've set in the
“Formats” screen. By looking at the input source, you can determine how the
primary format should likely be set (unless you want to perform a conversion on
input.) If you wish to select a different input you can do so by clicking a
different radio button.
Click a Tab to
Select a Screen
Click to Select
an Input