User`s guide

16 - Xserve Take Apart
Optical Drive, Xserve
Note: If you are replacing the optical drive faceplate, do the following:
4. Open the optical drive tray by inserting a straightened paperclip into the manual eject
hole on the front of the drive.
5. Turn the drive over so the bottom of the drive faces up. Using a small (#00) Phillips
screwdriver, remove the two screws that secure the faceplate.
6. Using a small flat-blade screwdriver, release the latch on the far right end of the
faceplate.
7. Remove the faceplate from the drive.