User`s guide

5 - Xserve Verification of Basic Services
How to Discover Xserve on Your Network
Note: To continue, the first 8 characters of the Xserve serial number are required to
authenticate. The password is case-sensitive. If you encounter difficulty using this
password please see technical document 61644: "Xserve: Initial Password Is Case
Sensitive".
Option C
As an alternative to using Server Assistant, the following procedure may be performed
using the Terminal application.
1. Open the Terminal application on the Admin computer.
2. Type: cd/System/Library/ServerSetup
3. Press Return.
4. Type: ./sa_srchr 224.0.0.1
5. Press Return.
6. Verify that Xserve shows its correct IP address, hardware (MAC) address, and DNS
name (if applicable).