Specifications
Pulso G lamp base Data sheet C7
bc_do_ds_pulsog_en.doc
BR/cst 11.03
3
Accessories (continuation)
Umbrella ∅ 102cm
white/silver/transparent
Art. no. 33.452.00–33.454.00
Umbrella ∅ 82cm
white/silver/transparent
Art. no. 33.459.00–33.461.00
Umbrella reflector Art. no. 33.496.00
Hazylight-Soft Art. no. 33.513.00
Megaflex 2 x 1,2 m Art. no. 33.520.00
Megaflex 3 x 1,2 m Art. no. 33.521.00
Reflector Cumulite 2 Art. no. 33.534.00
Megalite system (different sizes) Art. no. 33.540.00–33.541.06
Fresnel spot attachment Art. no. 33.630.00
Projection attachment Art. no. 33.640.00
Folding reflectors Pulsoflex EM different sizes
Folding reflectors Pulsoflex C different sizes
with adapter ring for Pulsoflex C/EM Art. no. 33.400.00
with adapter ring fpr Pulsoflex C/EM
and HMI F575 lamp base
Art. no. 43.100.00
Para / Para FF different sizes
Special features / restrictions
Flash tubes for the Pulso G lamp base are available with a maximum capacity of 1600 J
respectively 3200 J (see chapter “accessories”). With each flash tube, two stickers
labelled “max. 1600 J” respectively “max. 3200 J” are enclosed, which must be stuck
on the blue square onto the lamp plug as well as at the side of the tilting head of the
lamp base. The Pulso G lamp base must not be charged above the indicated value.
For thermal reasons the UV filter coating of the flash tube 3200 J has been applied
directly onto the protecting glass. The flash tube 1600 J however has the UV filter
coating directly on the flash tube, for price reasons. The clear protecting glass does not
have any optical effect. If a uniform fitting of all lamp base types is intended, the lamp
base Pulso G may also be fitted with a clear flash tube 1600 J and coated protecting
glass.
Due to the improved protecting glass holder, new protecting glasses are now also
available. These have a marking line and three grooves at the rim. When inserting the
protecting glass into the locking device of the Pulso G lamp base, the marking line must
be at the top. After engaging the protecting glass, it must be slightly turned, to prevent
accidental loosening. The previous protecting glasses are not compatible to the Pulso
G lamp.
Warning: For safety reasons the lamp must not be operated without protecting glass.