User Guide

68 Chapter 4 Dynamics
 Release: Controls how quickly the volume returns to the original level. Set to a high
value if you want the music mix to slowly fade up after the announcement.
Using the Ducker
For technical reasons, the Ducker plug-in can only be inserted in output and bus
channels.
To use the Ducker plug-in:
1 Insert the Ducker plug-in into an audio or bus channel strip.
2 Assign all track outputs that are supposed to “duck” (dynamically lower the volume of
the mix) to a bus.
3 Select the buss that carries the ducking (vocal) signal in the Side Chain menu of the
Ducker plug-in.
Note: Unlike all other side chain capable plug-ins, the Ducker side chain is mixed with
the output signal after passing through the plug-in. This ensures that the ducking side
chain signal (the voice over) is heard at the output.
4 Adjust the Ducker’s parameters.
Enveloper
The Enveloper is an unusual effect that lets you shape transients—the attack and
release phases of a signal. This gives it a unique capability to shape the signal, and can
be used to achieve impressive results different than any other dynamics effect.
Enveloper Parameters
The Gain and Time controls on the left apply to the attack portion of the signal, while
the Gain and Time controls on the right apply to the release portion.
 Threshold slider and field: Sets the threshold above which the attack and release
levels are altered.
 (Attack) Gain slider and field: Sets the gain on the attack phase of the signal. When
set to the center (0) position, the signal is unaffected.