User Guide

Chapter 29 Ultrabeat 579
Pan Modulation
Pan Modulation varies the panorama position of a drum sound dependent on a Mod
and Via source. The modulation set here is relative to the panorama position set in
Ultrabeat’s mixer.
The panorama position set in the mixer is represented here by a thin, red line. To the
left and right of the line, small sliders (and corresponding menus) allow the adjustment
of the Mod and Via modulation routings.
Note: You cannot directly grab and move the red line (that represents panorama
position) shown in this section. In order to move the line, rotate the pan knob in the
Mixer section.
Stereo Spread
Stereo Spread broadens the stereo image, making it wider and more spacious.
Low Frequency applies the (spreading) effect to the bass frequencies: the higher the
value, the more prominent the effect becomes. Hi Frequency allows you to apply the
effect to the high frequencies.
Voice Volume
This rotary knob adjusts the output volume of the individual drum sounds. To be more
exact, you are controlling the Voice Volume with Env 4, thereby adjusting the maximum
volume level attained after the attack phase of Env 4.
The effect the envelope has on Voice Volume can also be modulated by a Via source.