User Guide

492 Chapter 28 Sculpture
To activate the routing of the Note On Random modulators, click on the 1 or 2 buttons.
 Target: Determines the modulation destination—what parameter will be randomly
modulated when a note is played.
 Amount: Sets the modulation amount—the strength of the modulation.
Velocity Modulations
The excite objects and the filter have dedicated velocity sensitivity controls. Many other
modulation routings also allow you to select velocity as a via input source.
In some cases, it may be of use to directly control other synthesis core parameters by
velocity. This can be done in this section—where two independent destination/
amount/velocity curve slots are available. To activate either, click on the 1 or 2 buttons.
 Target 1/2: Click the respective Target menu to choose the destination parameter
that you wish to modulate by velocity.
 Amount 1/2: The slider below each target determines the amount of modulation.
 Curve 1/2: Click on the appropriate radio button to choose from concave, linear, and
convex velocity curves.