User Guide

40 Chapter 2 Delay
By default, the stereo spread is set to 100%. To adjust this, click drag on either side of
the dot. As you do so, the width of the line (extending outwards from the dot) changes.
Keep an eye on the spread parameter in the Tap parameter bar to view the spread
percentage numerically.
In surround configurations, the bright line represents the surround angle. See “Working
With Delay Designer in Surround” for more information.
Using the Toggle Buttons to Edit Tap Parameters
Each tap has its own toggle button in the Toggle bar. These buttons offer you a quick
way to graphically activate and deactivate parameters. The specific parameter being
toggled by the toggle buttons depends on the current View button selection:
 Cutoff view: Toggle buttons turn the filter on or off.
 Reso view: Toggle buttons switch filter slope between 6 dB and 12 dB.
 Pitch view: Toggle buttons switch pitch transposition on or off.
 Pan view: Toggle buttons switch between the Flip modes.
 Level view: Toggle buttons mute or unmute the tap.
Option-Command-clicking a toggle button switches the mute state, regardless of the
current view. When you release the Option and Command keys, the toggle buttons
return to their standard functionality (in the active View mode).