User Guide

390 Chapter 24 EVP88
EVP88 and MIDI
This section outlines some of the special MIDI control features available to the EVP88.
Adaptation of Your MIDI Keyboards Velocity Sensitivity
The EVP88 responds with extreme sensitivity to the velocity information transmitted
with MIDI note messages. It’s advisable to set the velocity and dynamic track
parameters in Logic Pro with care. You can try the following tip to fine-tune the velocity
curve if you find that you’re not getting the right feel with your MIDI keyboard.
 Create a transformer object in the Environment, and cable it between the Physical
Input and Sequencer Input objects on the Click and Ports layer.
 Set the transformer parameters so that all MIDI events with the condition note are
set to Use Map under Vel in the lower operation line.
You can then draw your own individual keyboard velocity curve. For more detailed
information, please refer to the Environment chapter of the Logic Pro 8 User Manual.
MIDI Controller List
Controller Number Parameter Name
1 Tremolo parameters: Intensity knob
12 Model knob
13 Model parameters: Decay knob
14 Model parameters: Release knob
15 Model parameters: Bell knob
16 Model parameters: Damper knob
17 Model parameters: Stereo Intensity knob
18 EQ parameters: Treble knob
19 EQ parameters: Bass knob
20 Drive parameters: Gain knob
21 Drive parameters: Tone knob
22 Phaser parameters: Rate knob
23 Phaser parameters: Color knob
24 Phaser parameters: Stereophase knob
25 Tremolo parameters: Rate knob
26 Tremolo parameters: Intensity knob
27 Tremolo parameters: Stereophase knob
28 Chorus parameters: Intensity knob