User Guide

372 Chapter 23 EVD6
Pickup Mode
Clicking the AB and CD switches changes the virtual wiring of the two pickups. The
current wiring, the EVD6 calls it Pickup Mode, is displayed in the Pickup Mode panel.
You can also click directly on the Pickup Mode panel, and choose the desired mode
from a menu.
 C + A = Lower
 C + B = Upper
 D + A = Lower-Upper
 D + B = Lower+Upper
Also see “Stereo Spread” on page 363, and “Pickup Switches” on page 362.
Effects Parameters
No Clavinet simulation would be complete without a selection of effects processors.
The EVD6 doesn’t disappoint in this regard, incorporating three footpedal effects that
have formed an integral part of classic Clavinet sounds over the decades. Each effect
was painstakingly modelled on effects pedals that were available in the heyday of the
Clavinet—the 1970s—ensuring that vintage sound in your performances.
Needless to say, you can also take advantage of Logic Studio’s extensive range of effect
plug-ins, to further tailor your sound.
Distortion
The integrated distortion effect offers adjustable intensity and tone. Range: Tone –
2000 Hz to 20,000 Hz, Gain –0 dB to 20 dB. Using low Tone and Gain settings allows the
Distortion unit to create warm overdrive effects. Bright and screaming distortion effects
are produced with high Tone and Gain settings.