User Guide

36 Chapter 2 Delay
Editing Taps
You can edit taps both graphically, using the main Tap display, and numerically, using
the Tap parameter bar. All tap edits are reflected both graphically and numerically.
Editing Taps in the Tap Parameter Bar
You can edit every parameter in the Tap parameter bar using standard click, or click-
drag techniques.
To edit a parameter in the Tap parameter bar:
m Click on a button or up/down arrow to enable, disable, or alter a parameter value.
m Drag a parameter value up or down to change it.
If you have multiple taps selected in the Tap display, the values of all selected taps will
be increased or decreased. These changes are relative to other taps.
Option-clicking on a parameter resets it to the default setting. If multiple taps are
selected, Option-clicking a parameter of one tap will reset that parameter to its default
value for all selected taps.
Editing Parameters in the Tap Display
You can graphically edit any tap parameter that is represented as a vertical line in the
main Tap display.
To edit a tap parameter in the Tap display:
1 Click the view button of the parameter you want to edit.
2 Click-drag vertically on the bright line of the tap you wish to edit (or on one of the
selected taps, if multiple taps are selected).