User Guide

202 Chapter 14 Utility
Multichannel Gain
The Multichannel Gain lets you control the gain (and phase) of each channel of a
surround track or bus independently.
 Master slider: Sets the master gain for the combined channel output.
 Channel gain sliders: Each slider sets the gain for its channel.
 Phase Invert buttons: When selected, the phase of the selected channel is inverted.
 Mute buttons: When selected, the channel is muted from the overall output.
Test Oscillator
The Test Oscillator generates a static frequency or a sine sweep. The latter is a user-
defined frequency spectrum tone sweep.
Test Oscillator Parameters
 Waveform buttons: Select the type of waveform to be used for test tone generation.
 The Square Wave and Needle Pulse waveforms are available as either aliased or
anti aliased versions. The latter when used in conjunction with the Anti Aliased
button.
 Needle Pulse is a single needle impulse waveform.
 If the Sine Sweep button is active, the fixed oscillator settings in the Waveform
section above are disabled.
 Frequency: Determines the frequency of the oscillator (default is 1 kHz).
 Level: Determines the overall output level of the Test Oscillator.