User Guide

188 Chapter 12 Convolution Reverb: Space Designer
EQ Parameters
Space Designer features a four-band EQ comprised of two parametric mid-bands plus
two shelving filters (one low shelving filter and one high shelving filter).
The EQ has the following parameters:
 EQ On/Off button: Click to switch the entire EQ section on or off.
 Individual EQ buttons (1 through 4): Click to turn individual EQ bands on or off.
 Frequency: Sets the frequency for the selected EQ band.
 Gain: Adjusts the gain cut or boost for the selected EQ band.
 Q: Sets the Q-factor for the two parametric bands. The Q can be adjusted from 0.1
(very narrow) to 10 (very wide).
You can edit the EQ parameters numerically in the parameter bar, or graphically on the
main display. Move the mouse horizontally over the display. When your mouse cursor is
in the access area of a band, its individual curve and parameter area will be highlighted
and a pivot point appears.