User Guide

Chapter 12 Convolution Reverb: Space Designer 181
Button Bar
The Envelope and EQ display’s button bar includes buttons to switch the main display
between envelopes and the EQ, as well as some function buttons.
 Reset button:
Click to reset the currently displayed envelope or EQ to its default values.
 All button: Click to reset all envelopes and the EQ to default values.
 Volume Env button: Click this button to bring the volume envelope to the front of the
main display. The other envelope curves are shown as transparencies in the
background. See “Volume Envelope Parameters” on page 183 for information on the
volume envelope.
 Filter Env button: Click this button to bring the filter envelope to the front of the main
display. The other envelope curves are shown as transparencies in the background.
See “Filter Parameters” on page 184 for information on the filter envelope.
 Density Env button: Click this button to bring the density envelope to the front of the
main display. The other envelope curves are shown as transparencies in the
background. See “Synthesizer Impulse Response Parameters” on page 186 for
information on the density envelope.
 EQ button: Click this button to switch the main display to Space Designer’s four-band
parametric EQ. See “EQ Parameters” on page 188 for more information on Space
Designer’s EQ.
 Reverse button: Click to reverse the impulse response together with its envelopes.
When you reverse the impulse response, you are effectively using the tail rather than
the front end of the sample. As such, you may need to use lower or even negative
Pre-Dly values when reversing.
Additional View Items in Envelope View
When displaying envelopes, the main display offers a few other buttons and an
overview that is not part of the EQ view:
 Impulse response overview: Indicates which portion of the impulse response file is
currently visible, helping you to orientate yourself when zoom is active.