User Guide

176 Chapter 12 Convolution Reverb: Space Designer
Input Slider
The Input slider functions as either a stereo processing slider for stereo instances of
Space Designer, or as an LFE to Reverb slider in surround mode. The Input slider does
not appear in mono or mono to stereo instances of Space Designer.
Stereo Mode
For stereo instances of Space Designer, the Input slider determines how a stereo signal
is processed:
 Stereo setting (top of slider): The signal is processed on both channels, retaining the
stereo balance of the original signal.
 Mono setting (middle of slider): The signal is processed in mono.
 XStereo setting (bottom of slider): The signal is inverted, with processing for the right
channel occurring on the left, and vice versa.
 In-between positions: A mixture of stereo to mono crossfeed signals is produced.
∏ Tip: The three base positions of the Input slider are clickable key parameter
positions—if you click them the slider will immediately jump to the clicked position.
Surround Mode
For surround instances of Space Designer, the Input slider determines how much of the
LFE signal is mixed with the surround channels feeding the reverb.
At its lowest setting, the slider acts as an LFE bypass, with all the LFE signal passed
through the reverb unprocessed.