User Guide

Chapter 9 Modulation 149
 Stereo Phase knob: If set to a value between 0 and 360 degrees, Stereo Phase
determines the phase relationship between left and right channel modulations, thus
enabling synchronized stereo effects. If “free” is chosen, you can set the modulation
speed of the left and right channel independently.
 Rate Left knob: Sets the modulation speed of the left channel when Stereo Phase is
set to free. If Stereo Phase is set to a value between 0 and 360 degrees, Rate Left sets
the modulation speed for both the left and right channels. Rate Right has no
function when in this mode.
 Rate Right knob: Sets the modulation speed of the right channel when Stereo Phase
is set to free.
Spreader
You can use the Spreader effect to widen the stereo spectrum of a signal. The Spreader
effect periodically shifts the frequency range of the original signal in a nonlinear way,
changing the perceived width of the signal.
 Intensity slider and field: Determines the modulation amount.
 Speed knob and field: Defines the frequency, and therefore the speed, of the LFO.
 Channel Delay slider and field: Determines the delay time in samples.
 Mix slider and field: Sets the balance between the dry and wet signals.