Instruments and Effects

Chapter 2 Delay 33
Deleting Taps
To delete a tap, simply select it and press the Delete or Backspace key. You can also
select a tap in the identification bar and drag it down, below the Tap display.
These methods also work when more than one tap is selected.
Finally, you can right-click or Control-click on any tap in the Delay Designer interface,
and choose the Delete All Taps command from the shortcut menu to delete all taps.
Selecting Taps
There will always be at least one selected tap. You can easily distinguish selected taps
by color—the toggle bar icons, and identification bar letters of selected taps are white.
To select a tap, do one of the following:
m Click on a tap in the main display.
m Click on the desired tap letter in the identification bar.