Instruments and Effects
Table Of Contents
- Logic Studio Instruments and Effects
- Contents
- Introduction to the Logic Studio Plugins
- Amp Modeling
- Delay
- Distortion
- Dynamics
- EQ
- Filter
- Imaging
- Metering
- Modulation
- Pitch
- Reverb
- Convolution Reverb: Space Designer
- Specialized
- Utility
- EVOC 20 PolySynth
- EFM1
- ES E
- ES M
- ES P
- ES1
- ES2
- The ES2 Parameters
- Tutorials
- Sound Workshop
- Sound Design From Scratch, Filter Settings, Digiwaves
- Three Detuned Sawtooth Oscillators and Unison Mode
- Extremely Detuned Monophonic Analog Sounds, Effects
- Clean Bass Settings With One Oscillator Only
- Distorted Analog Basses
- FM Intensity and Frequency
- Controlling FM Intensity by an Envelope and FM Scaling
- FM With Drive and Filter-FM
- FM With Digiwaves
- FM With Wavetables
- Distorted FM in Monophonic Unison
- FM With Unusual Spectra
- Slow and Fast Pulse Width Modulations With Oscillator 2
- Pulse Width Modulation With Two Oscillators, PWM Strings
- Ring Modulation
- Oscillator Synchronization
- First Steps in Vector Synthesis
- Vector Synthesis—XY Pad
- Vector Synthesis Loops
- Bass Drum With Self-Oscillating Filter and Vector Envelope
- Percussive Synthesizers and Basses With Two Filter Decay Phases
- Templates for the ES2
- Sound Workshop
- EVB3
- EVD6
- EVP88
- EXS24 mkII
- Learning About Sampler Instruments
- Loading Sampler Instruments
- Working With Sampler Instrument Settings
- Managing Sampler Instruments
- Searching for Sampler Instruments
- Importing Sampler Instruments
- Parameters Window
- The Instrument Editor
- Setting Sampler Preferences
- Configuring Virtual Memory
- Using the VSL Performance Tool
- External Instrument
- Klopfgeist
- Sculpture
- The Synthesis Core of Sculpture
- Sculpture’s Parameters
- Programming: Quick Start Guide
- Programming: In Depth
- Ultrabeat
- GarageBand Instruments
- Synthesizer Basics
- Glossary
- Index
Chapter 1 Amp Modeling 23
 EQ pop-up menu: Choose one of the four EQ models. The choices are:
British 1, British 2, American, and Modern EQ.
 Amp–Speaker Link button: Links the Amp and Speaker menus so that when you
change the amp model, the speaker associated with that amp is loaded
automatically.
 Amp–EQ Link button: Links the Amp and EQ menus so that when you change the
amp model, the EQ model associated with that amp is loaded automatically.
Each amp model has a speaker and EQ model associated with it. Together, the amp,
speaker, and EQ combined recreate a well-known guitar sound. However, you can
freely combine any speaker or EQ model with any amp by turning off the two Link
buttons.
 Gain knob: Sets the amount of pre-amplification applied to the input signal. This
control has different effects, dependent on which Amp model is selected. For
example, when using the British Clean amp model, the maximum Gain setting
produces a powerful crunch sound. When using the British Gain or Modern Gain
amps, the same Gain setting produces heavy distortion, suitable for lead solos.
 Bass, Mids, and Treble knobs: Adjusts the frequency ranges of the EQ models, similar
to the tone knobs on a hardware guitar amplifier.
 Presence knob: Adjusts the high frequency range. The Presence parameter affects
only the output (Master) stage of Guitar Amp Pro.
US 1x10 open back Not much resonance in the low frequency range. Suitable for use with
(blues) harmonicas.
US 1x12 open back 1 Open enclosure of an American lead combo with a single 12" speaker.
US 1x12 open back 2 Open enclosure of an American clean/crunch combo with a single
12" speaker.
US 1x12 open back 3 Open enclosure of another American clean/crunch combo with a single
12" speaker.
US broad range Cabinet simulation of a classic electric piano speaker.
Analog simulation Internal speaker simulation of a well-known British 19" tube preamplifier.
UK 1x12 A British Class A tube open back with a single 12" speaker.
UK 4x12 Classic closed enclosure with four 12" speakers (black series), suitable for
Rock.
US 1x12 open back Open enclosure of an American lead combo with a single 12" speaker.
US 1x12 bass reflex Closed bass reflex cabinet with a single 12" speaker.
DI Box This option allows you to bypass the speaker simulation section.
Speaker type Description