2009

Choosing Preset EVB3 Registrations
The upper manual preset keys are located to the left of the Morph wheel, and the lower
manual preset keys are found to the right of the Morph wheel. The current drawbar
positions are indicated by small vertical lines on each preset key. These miniature drawbar
representations update in real time.
Important: The presets relate only to the registration (drawbar) settings of a single manual.
The presets do not store vibrato or other parameter settings. If you want to save and
recall the overall instrument settings (including effects), use the Settings commands in
the plug-in window header.
To choose a registration
Do one of the following:
µ
Click the desired preset key in the EVB3 interface (left or right of the Morph wheel).
µ
Play one of the preset key MIDI notes (MIDI note numbers 24 to 35).
You can edit the drawbars of recalled presets immediately.
The preset automatically memorizes any drawbar position alterations as you make them,
with no further action required. In other words, you don’t need to actively “save” a preset.
You can, however, make use of the Save To function, to save a registration to a specific
preset key (see Saving EVB3 Drawbar Registrations While Morphing).
Note: On keys C# to A#, the percussion works only if the Perc parameter is set to Always
(see Using the EVB3 Percussion Effect).
Disabling MIDI Preset Switching in the EVB3
You can disable the switching of presets with MIDI notes 24 to 35, thus avoiding any
problems that may arise from transpositions.
To disable MIDI preset key switching
µ
Turn off the “MIDI to Presetkey” parameter (found in the aqua-colored section at the
lower left of the interface).
Click here to disable
preset key switching.
147Chapter 7 EVB3