2009
Table Of Contents
- Logic Studio Effects
- Contents
- An Introduction to the Logic Studio Effects
- Amps and Pedals
- Amp Designer
- Choosing an Amp Designer Model
- Tweed Combos
- Classic American Combos
- British Stacks
- British Combos
- British Alternatives
- Metal Stacks
- Additional Combos
- Building a Customized Amp Designer Combo
- Choosing an Amp Designer Amplifier
- Choosing an Amp Designer Cabinet
- Amp Designer Cabinet Reference Table
- Using Amp Designer’s Equalizer
- Amp Designer Equalizer Type Reference Table
- Using Amp Designer’s Gain, Presence, and Master Controls
- Getting to Know Amp Designer’s Effects Parameters
- Using Amp Designer’s Reverb Effect
- Amp Designer Reverb Type Reference Table
- Using Amp Designer’s Tremolo and Vibrato Effects
- Setting Amp Designer Microphone Parameters
- Setting Amp Designer’s Output Level
- Bass Amp
- Guitar Amp Pro
- Building Your Guitar Amp Pro Model
- Choosing a Guitar Amp Pro Amplifier
- Choosing a Guitar Amp Pro Speaker Cabinet
- Choosing a Guitar Amp Pro Equalizer
- Using Guitar Amp Pro’s Gain, Tone, Presence, and Master Controls
- Getting to Know Guitar Amp Pro’s Effects Section
- Using Guitar Amp Pro’s Tremolo and Vibrato Effects
- Using Guitar Amp Pro’s Reverb Effect
- Setting Guitar Amp Pro Microphone Parameters
- Setting the Guitar Amp Pro Output Level
- Pedalboard
- Amp Designer
- Delay Effects
- Delay Designer
- Getting to Know the Delay Designer Interface
- Getting to Know Delay Designer’s Main Display
- Using Delay Designer’s View Buttons
- Zooming and Navigating Delay Designer’s Tap Display
- Creating Taps in Delay Designer
- Selecting Taps in Delay Designer
- Moving and Deleting Taps in Delay Designer
- Using Delay Designer’s Tap Toggle Buttons
- Editing Parameters in Delay Designer’s Tap Display
- Aligning Delay Designer Tap Values
- Editing Filter Cutoff in Delay Designer’s Tap Display
- Editing Pan in Delay Designer’s Tap Display
- Editing Taps in Delay Designer’s Tap Parameter Bar
- Editing Delay Designer Taps with the Shortcut Menu
- Resetting Delay Designer Tap Values
- Synchronizing Taps in Delay Designer
- Using Delay Designer’s Master Section
- Working with Delay Designer in Surround
- Echo
- Sample Delay
- Stereo Delay
- Tape Delay
- Delay Designer
- Distortion Effects
- Dynamics Processors
- Equalizers
- Filter Effects
- AutoFilter
- EVOC 20 Filterbank
- EVOC 20 TrackOscillator
- What Is a Vocoder?
- How Does a Vocoder Work?
- Getting to Know the EVOC 20 TrackOscillator Interface
- EVOC 20 TrackOscillator Analysis In Parameters
- Using EVOC 20 TrackOscillator Analysis In Parameters
- EVOC 20 TrackOscillator U/V Detection Parameters
- EVOC 20 TrackOscillator Synthesis In Parameters
- Basic Tracking Oscillator Parameters
- Tracking Oscillator Pitch Correction Parameters
- Quantizing the Pitch of the Tracking Oscillator
- EVOC 20 TrackOscillator Formant Filter Parameters
- Using Formant Stretch and Formant Shift
- EVOC 20 TrackOscillator Modulation Parameters
- EVOC 20 TrackOscillator Output Parameters
- Fuzz-Wah
- Spectral Gate
- Imaging Processors
- Metering Tools
- Modulation Effects
- Pitch Effects
- Reverb Effects
- Space Designer Convolution Reverb
- Getting to Know the Space Designer Interface
- Working with Space Designer’s Impulse Response Parameters
- Working with Space Designer’s Envelope and EQ Parameters
- Working with Space Designer’s Filter
- Working with Space Designer’s Global Parameters
- Using Space Designer’s Input Slider
- Using Space Designer’s Latency Compensation Feature
- Using Space Designer’s Definition Parameter
- Using Space Designer’s Rev Vol Compensation
- Using Space Designer’s Output Sliders
- Working with Pre-Dly (Predelay) in Space Designer
- Using Space Designer’s IR Start Parameter
- Using Space Designer’s Spread Parameters
- Automating Space Designer
- Specialized Effects and Utilities
- Utilities and Tools
• Stereo Width knob: Distributes the output signals of the filter bands in the stereo field.
• At the left position, the outputs of all bands are centered.
• At the centered position, the outputs of all bands ascend from left to right.
• At the right position, the bands are output—alternately—to the left and right
channels.
EVOC 20 TrackOscillator
The EVOC 20 TrackOscillator is a vocoder with a monophonic pitch tracking oscillator.
The tracking oscillator tracks, or follows, the pitch of a monophonic input signal. If the
input signal is a sung vocal melody, the individual note pitches are tracked and mirrored,
or played, by the synthesis engine.
The EVOC 20 TrackOscillator features two formant filter banks, an analysis bank, and a
synthesis filter bank. Each offers multiple input options.
You can capture an analysis signal source by using the audio arriving at the input of the
channel strip that the EVOC 20 TrackOscillator is inserted in, or by using a side chained
signal from another channel strip.
The synthesis source can be derived from the audio input of the channel strip that the
EVOC 20 TrackOscillator is inserted in, a side chain signal, or the tracking oscillator.
As you can freely select both the analysis and synthesis input signals, the EVOC 20
TrackOscillator is not limited to pitch tracking effects. It is extremely useful for unusual
filter effects. For example, you could filter an orchestral recording on one channel strip
with train noises side chained from another channel strip. Another great use is for
processing drum loops with side chained signals, such as other drum loops or rhythmic
guitar, clavinet and piano parts.
What Is a Vocoder?
The word vocoder is an abbreviation for VOice enCODER. A vocoder analyzes the sonic
character of the audio signal arriving at its analysis input and transfers it to the synthesizer’s
sound generators. The result of this process is heard at the output of the vocoder.
The classic vocoder sound uses speech as the analysis signal and a synthesizer sound as
the synthesis signal. This sound was popularized in the late 1970s and early 1980s. You’ll
probably know it from tracks such as “O Superman” by Laurie Anderson, “Funky Town”
by Lipps Inc., and numerous Kraftwerk pieces—such as “Autobahn,” “Europe Endless,”
“The Robots,” and “Computer World.”
In addition to these “singing robot” sounds, vocoding has also been used in many
films—such as with the Cylons in Battlestar Galactica, and most famously, with the voice
of Darth Vader from the Star Wars saga.
143Chapter 6 Filter Effects










