X

Chapter 7 Work with tracks 194
•
Add Eects Tail to File checkbox: Select to continue the bounce process after the end of the
bounce range—either to the end of the cycle or to the end of the last selected region—until
there is no longer a signal. Otherwise, only the bounce range is bounced.
•
Add Eects Tail to Region checkbox: Select to include the entire bounce le in the bounce
region. Otherwise, the bounce region only includes the bounce range.
•
Include Volume/Pan Automation checkbox: Select to have volume and pan automation
performed during the bounce process, with their result inuencing the bounce le. Otherwise,
the volume and pan automation is simply copied, not performed.
•
Normalize pop-up menu: Choose between three states of normalization:
•
O: Turns o normalization.
•
Overload Protection Only: Allows downward normalization in case of overloads—levels above
0 dB, which would lead to clipping—but no normalization in case of lower levels.
•
On: Allows full bidirectional normalization.
•
Restore Defaults button: Click to set all parameters in the dialog to their default settings.
4 Click OK to trigger an in-place bounce of the selected region or regions.
Note: When you click OK, the settings chosen above are stored in the preferences and recalled
when you next access the Bounce Regions in Place function.