7.2.1

84 Chapter2LogicControl

 Themodedisplayshowsdr
 V-Pot/V-Select1showsandeditsthecurrentDropstatus(offoron);youcanalsouse
theDROPbutton.
 V-Pot3—Move—movesthecurrentDropregionbyabarwitheach“click”when
turningtheV-Pot.
 ThedisplayshowstheDropInandDropOutlocatorsaboveV-Pots5and7.
 PressingV-Select5picksupthecurrentsongpositionfortheDropInlocator.
 TurningV-Pot5changestheDropInlocatorinbars.
 TurningV-Pot6changestheleftlocatorinbeats(denominatorsteps).
 PressingV-Select7picksupthecurrentsongpositionfortheDropOutlocator.
 TurningV-Pot7changestheDropOutlocatorinbars.
 TurningV-Pot8changestherightlocatorinbeats(denominatorsteps).
ChangingadroplocatorwiththeLogicControlenablesDropmode.
ToreturntoaregularAssignmentmode,pressoneoftheAssignmentbuttons.
Replace
Activates/deactivatesReplacemode.
Click
Enables/DisablesMIDI(orKlopfgeist)metronomeclick.Thereareindependentclick
settingsforplayandrecord.Theclicksettingsareenabledordisabled,dependenton
thecurrentRecordstate(seethe“MIDI/MonitorMetronomeClick”keycommand).
PressingSHIFTandCLICKbuttonsactivates/deactivatesbothExternalSyncmodeand
TransmitMMC.
Solo
TheSOLObuttonbehavesaspertheSolokeycommand.Individualchannelscanbe
soloedviathechannelSOLObuttonsoneachchannelstrip.MIDIorAudioRegionscan
beselectedandsoloedalongwiththeselectedchannels.Eachchannelfeaturesan
independentSOLOLEDwhichislitwhenatrackissoloed.TheRUDESOLOLED—just
totherightofthePosition/TimeDisplay—islitwheneveranytrackissoloed.
PressingtheSHIFTandSOLObuttonsenablesSoloLockmode.