7.2.1

Chapter2LogicControl 61

 V-Select7orF7—switchestoFrequency/GainMultiChannelview.Inthismodeyou
canedittheFrequencyandGainparametersofaspecificEQband(1to8)forall
tracks.
 themodedisplaywillshowF1toF8,dependingontheselectedEQband.
 theupperLCDrowshowstracknames.
 thelowerLCDrowshowstheFrequencyoftheselectedEQ.
 turningaV-PotchangesEQFrequency.
 pressingaV-S electsetstheEQFrequencytoitsdefaultvalue.
 usetheMutebuttonstoBypasstheEQ.
 usethefadersadjusttheEQGain.
 V-Select8orF8—switchestoFrequency/GainChannelStripview.Inthismodeyou
canedittheFrequencyandGainparametersforallEQbandsoftheselectedtrack.
EachpairofchannelstripscorrespondstooneoftheEQbands.
 themodedisplaywillshowFG.
 V-Pots1to8controltheFrequencyofEQbands1to8.
 Mutebuttons1to8controltheBypassofEQbands1to8.
 Faders1to8controltheGainofEQbands1to8.
Notethatthefadersformafrequencyresponsecurveinthismode,iftheEQbands
haveascendingfrequencyvalues.
Youcaneditanothertrack’sEQ,withoutleavingthisviewmode,bysimplyselecting
thetrack.
SendAssignmentModes
BrieflypressingtheSENDbuttonswitchesbetweenSendMultiChannelorSend
ChannelStripview.
MultiChannelView
SendMultiChannelviewallowsyoutoeditoneSendparameterforall
tracks:Destination,Level,Position,andMute.TheSendslotnumber,andparameter
beingeditedwillbedisplayedforonesecondwhenswitchingtothismode.
 ThemodedisplaywillshowS1toS8,dependingontheselectedSendslot.
 TheupperLCDrowshowstracknames.
 TurningtheV-PotschangestheSendparameter.
 PressingaV-Selectconfirmsthepre-selectedSendDestinationandsetstheother
sendparameterstotheirdefaults.
 CursorUp/DownswitchestothenextorpreviousSendslot.