7.2.1

Table Of Contents

36 Chapter1ControlSurfaceSetup



FirstCharacter:

SecondCharacter:

Example:“Send@s#”shows“Send1”,“Send2”,andsoon.

FlipGroup

Whenset(toanyvalueotherthan“none”),thisnumberdefinesacounterpartforFlip

Mode.BysettingafaderandanencodertothesameFlipGroup,forexample,theyare

coupled.Toset“none,”enter0.

Exclusive

Onlyforsupportedcontrolsurfaces:whentheExclusivecheckboxisenabled,the

assignmentdeactivatesallotherassignmentsthathaveExclusivedisabled(forthesame

control).Thislimitstheoverwritingofamodelessassignmenttoparticularmodes.

Example:Fadersnormallycontrolvolume.Ifyouwanttocreateamodewherefaders

controlsendlevel,enableExclusive.

Class

Thispop-upmenucanbeusedtodefinetheassignmentclassor,putanotherway,

whattypeofdestinationparameteriscontrolled.Thefollowingsectionexplainsall

availableClassoptions.

Character Meaning

tTrack

r Surround

sSendslot

SAllSends

eEQband

E allEQs

pPlug-inInsertslot

i Instrument

Character Meaning

#Numberofabove(tracknumber,Sendslot,EQband,Plug-inslot)

nNameofabove

pNameofparameteraddressedbytheassignment

PNameoffirstparameter

oParameteroffset,countedfrom1

OMaximumparameteroffset,countedfrom1

bParameterbank(=parameteroffset/banksize),countedfrom1

Btotalnumberofbanks(=parameteroffset/banksize),countedfrom1