7.2.1

16
 193
16 TascamUS-2400
SetUp
PleasefollowthesestepsbeforeusingyourcontrolsurfacewithLogicPro7.
 MakesurethatyourUS-2400unit(s)areconnectedtothecomputerviaUSB.
 EnsurethattheUS-2400isinnativemode.PleaseconsultyourUS-2400manualfor
moreinformationonthis.
 LaunchLogicPro7.Yourcontrolsurface(s)willbescannedfor,andinstalled,
automatically.
SpecialNote
TheUS-2400iscapableofrunninginboth“native”andLogicControlemulationmodes.
IftheunitissetupinLogicControlemulationmode,andthenativesupportplug-inis
installedintheLogicPro7programbundle,LogicwilldetectbothaUS-2400native
controlsurfaceandaLogicControlplustwoExtender(XT)units.
IfyouwishtoruntheUS-2400inLogicControlmode,youmayfinditmostconvenient
toremovetheUS-2400plug-infromtheLogicPro7applicationbundle.Logicwillthen
detectaLogicControlplustwoExtender(XT)units(theappropriatesetupfortheUS-
2400inLogicControlemulationmode),whenyouscanyourcontrolsurfaces.
TheLogic/MackieControldiffersinbuttonlayouttotheTascamUS-2400.When
runningtheTascamUS-2400inLogicControlmode,certaincontrollersarenot
accessible(theJoystick,asanexample).Giventheserestrictions,it’snotrecommended
thattheTascamUS-2400isusedinLogicControlmodewithLogic.Ifyouchoosetodo
so,pleaserefertothedocumentationsuppliedwiththeTascamUS-2400fordetails.